The effect of annealing treatment on mechanical properties of aluminum clad steel sheet
作者： H Danesh Manesh , A Karimi Taheri
DOI: 10.1016/S0261-3069(03)00135-3
关键词: Brittleness 、 Bond strength 、 Materials science 、 Composite material 、 Base metal 、 Metallurgy 、 Bonding strength 、 Aluminium 、 Intermetallic 、 Annealing (metallurgy) 、 Formability
摘要: In this paper, the effects of annealing temperature and time on mechanical properties bond strength aluminum clad steel sheet are evaluated. The results indicate that there exist an optimum for achieving a suitable formability bonding between layer base metal. At temperature, brittle intermetallic at intimate interface layers is minimized.
elsevier.com
sci-hub.se 参考文章(17)
H.A. Mohamed, J. Washburn, MECHANISM OF SOLID STATE PRESSURE WELDING ,(1975)
Yeong-Maw Hwang, Hung-Hsiou Hsu, Hung-Jen Lee, Analysis of sandwich sheet rolling by stream function method International Journal of Mechanical Sciences. ,vol. 37, pp. 297- 315 ,(1995) , 10.1016/0020-7403(95)93522-8
A. Karimi Taheri, T. M. Maccagno, J. J. Jonas, Dynamic Strain Aging and the Wire Drawing of Low Carbon Steel Rods Isij International. ,vol. 35, pp. 1532- 1540 ,(1995) , 10.2355/ISIJINTERNATIONAL.35.1532
Hisao KAWASE, Mamoru MAKIMOTO, Kazuhiro TAKAGI, Youji ISHIDA, Takakazu TANAKA, Development of Aluminum-clad Steel Sheet by Roll-bonding Isij International. ,vol. 23, pp. 628- 632 ,(1983) , 10.2355/ISIJINTERNATIONAL1966.23.628
Akihito Yahiro, Takeshi Masui, Takeshi Yoshida, Daiharu Doi, Development of Nonferrous Clad Plate and Sheet by Warm Rolling with Different Temperature of Materials. Isij International. ,vol. 31, pp. 647- 654 ,(1991) , 10.2355/ISIJINTERNATIONAL.31.647
A. Karimi Taheri, T. M. Maccagno, J. J. Jonas, Effect of cooling rate after hot rolling and of multistage strain aging on the drawability of low-carbon-steel wire rod Metallurgical and Materials Transactions A. ,vol. 26, pp. 1183- 1193 ,(1995) , 10.1007/BF02670614
W. Zhang, N. Bay, T. Wanheim, Influence of hydrostatic Pressure in Cold-Pressure Welding CIRP Annals. ,vol. 41, pp. 293- 297 ,(1992) , 10.1016/S0007-8506(07)61207-4
B.C. De Cooman, H. Dillen, H. Storms, I. Bultinck, P. Buysse, I.G. Ritchie, M. Kuhn, M. Fiorucci, N ageing in aluminized steel sheet : an industrial application of high frequency internal friction measurements to point defect-interface interactions Journal of Alloys and Compounds. ,vol. 212, pp. 619- 624 ,(1994) , 10.1016/0925-8388(94)90581-9
Yeong-Maw Hwang, Hung-Hsiou Hsu, Yuh-Lin Hwang, Analytical and experimental study on bonding behavior at the roll gap during complex rolling of sandwich sheets International Journal of Mechanical Sciences. ,vol. 42, pp. 2417- 2437 ,(2000) , 10.1016/S0020-7403(99)00068-5
D. Pan, K. Gao, J. Yu, Cold roll bonding of bimetallic sheets and strips Materials Science and Technology. ,vol. 5, pp. 934- 939 ,(1989) , 10.1179/MST.1989.5.9.934