Control of prime mover in HVAC distribution system
作者： Osman Ahmed
DOI:
关键词: Pressure drop 、 Static pressure 、 HVAC 、 Component (UML) 、 Prime mover 、 Ventilation (architecture) 、 Control theory 、 Control theory 、 Engineering 、 Setpoint
摘要: A controller controls a prime mover (source component) in heating, ventilation and air-conditioning (HVAC) distribution system. The determines static pressure setpoint for the source component by first determining loss of each branch throughout then contributed local components located within maximum losses are summed to provide component. method provides control independent configuration
lens.org 参考文章(8)
Lewis B. Mallory, Bob W. Dean, Method and apparatus for controlling forced air heating and/or cooling ,(1978)
Donald C. Wellman, William E. Clark, Variable volume multizone system ,(1984)
Nobuo Otsuka, Toyohiro Kobayashi, Peter Thompson, Duct type air conditioning system ,(1987)
Erkki Aalto, Timo Mattila, Mertsi Niemelä, Pertti Rantanen, Procedure for controlling and maintaining air currents or equivalent in an air-conditioning installation, and an air-conditioning system according to said procedure ,(1990)
D.F. Specht, A general regression neural network IEEE Transactions on Neural Networks. ,vol. 2, pp. 568- 576 ,(1991) , 10.1109/72.97934
Bernard Pierre Pradelle, Method and device for controlling air supply in a network of passages ,(1991)
L. K. Norford, M. Warren, Integrating VAV zone requirements with supply fan operation Ashrae Journal. ,vol. 35, pp. 43- 46 ,(1993)
Yamada Wazoh, Akutsu Masanori, Ikari Yoshiki, Maeda Hideo, Air conditioning apparatus ,(1988)