Study on Compressive Strength of Pellets for the Novel Silicothermic Process
作者： Daxue Fu , Lukui Guan , Ming Wen , Zhi-he Dou , Rui Zhang
DOI: 10.1007/978-3-319-48185-2_12
关键词: Materials science 、 Ferrosilicon 、 Calcination 、 Metallurgy 、 Carbon dioxide 、 Pellet 、 Dolomite 、 Compressive strength 、 Pellets 、 Magnesium
摘要: A novel process of magnesium production has been developed by changing the preparation method pellets silicothermic process. For method, consist dolomite, ferrosilicon, fluorite and binder, which need to be roasted before reduction. However, discharge carbon dioxide reduces compressive strength during calcinations. Therefore, present paper reports effects calcination atmosphere, temperature insulation post-processing conditions on pellets. The results indicated that was increased with increasing temperature. value obtained in air larger than other atmospheres. reached 80N experimental condition. pellet reduced at 1473K for 60min reduction ratio 86.75%.
springer.com
harvard.edu
sci-hub.st 参考文章(14)
Yun Li, Richard J. Fruehan, Computational fluid-dynamics simulation of postcombustion in the electric-arc furnace Metallurgical and Materials Transactions B-process Metallurgy and Materials Processing Science. ,vol. 34, pp. 333- 343 ,(2003) , 10.1007/S11663-003-0079-9
Li Rongti, Pan Wei, Masamichi Sano, Kinetics and mechanism of carbothermic reduction of magnesia Metallurgical and Materials Transactions B-process Metallurgy and Materials Processing Science. ,vol. 34, pp. 433- 437 ,(2003) , 10.1007/S11663-003-0069-Y
I.M. Morsi, K.A. El Barawy, M.B. Morsi, S.R. Abdel-Gawad, Silicothermic Reduction of Dolomite Ore Under Inert Atmosphere Canadian Metallurgical Quarterly. ,vol. 41, pp. 15- 28 ,(2002) , 10.1179/CMQ.2002.41.1.15
M Abdellatif, Review of the development work on the Mintek Thermal Magnesium Process (MTMP) Journal of The South African Institute of Mining and Metallurgy. ,vol. 111, pp. 393- 399 ,(2011)
Geoffrey Brooks, Simon Trang, Peter Witt, Hasan Nurul, Michael Nagle, The Carbothermic Route to Magnesium JOM. ,vol. 58, pp. 51- 55 ,(2006) , 10.1007/S11837-006-0024-X
O. A. Lebedev, I. Yu. Brusakov, N. P. Shkuryakov, Express Monitoring of MgCl2 Concentration in the Electrolyte of Magnesium Electrolyzers Russian Journal of Applied Chemistry. ,vol. 78, pp. 1276- 1279 ,(2005) , 10.1007/S11167-005-0497-3
Peng Jian-ping, Vacuum Thermal Reduction Kinetics of Calcined Dolomite with Al-Si-Fe Alloy The Chinese Journal of Process Engineering. ,(2010)
Wen Ming, Zhang Ting-an, Dou Zhi-he, Ren Xiao-dong, Zhang Rui, Zhou Lian, Research on new type materials preparation for magnesium production by Silicothermic process mt13. pp. 75- 79 ,(2013) , 10.1007/978-3-319-48150-0_13
Brian J Monaghan, Muhammad A Rhamdhani, Geoffrey A Brooks, Winny Wulandari, Magnesium: current and alternative production routes Engineering at the edge, the 2010 Chemeca Annual Conference (Chemeca 2010), Adelaide, South Australia, Australia, 26-29 September 2010. pp. 347- ,(2010)
A. Krishnan, U. B. Pal, X. G. Lu, Solid oxide membrane process for magnesium production directly from magnesium oxide Metallurgical and Materials Transactions B-process Metallurgy and Materials Processing Science. ,vol. 36, pp. 463- 473 ,(2005) , 10.1007/S11663-005-0037-9