A Mo–Si–B intermetallic alloy with a continuous α-Mo matrix
作者： J.H Schneibel , M.J Kramer , D.S Easton
DOI: 10.1016/S1359-6462(01)01227-1
关键词: Materials science 、 Solid solution 、 Alloy 、 Metallurgy 、 Powder metallurgy 、 Metal matrix composite 、 Composite material 、 Intermetallic 、 Silicide 、 Microstructure 、 Fracture toughness
摘要: Abstract A novel technique for fabricating high-temperature molybdenum–silicon–boron intermetallic composites is described. Vacuum annealing of silicide particles resulted in a loss Si, and consequently Mo solid solution layer, at the surfaces. Subsequent consolidation produced microstructure bonded by continuous matrix. The α-Mo imparted significant room temperature fracture toughness.
elsevier.com
sci-hub.se 参考文章(16)
Per Kofstad, High temperature corrosion Elsevier. ,(1988)
Douglas M. Berczik, Oxidation resistant molybdenum alloy ,(1996)
N.S. Stoloff, C.C. Koch, C.T. Liu, High-temperature ordered intermetallic alloys Materials Research Society,Pittsburgh, PA. ,(1985)
K Ito, K Ihara, K Tanaka, M Fujikura, M Yamaguchi, Physical and mechanical properties of single crystals of the T2 phase in the Mo–Si–B system Intermetallics. ,vol. 9, pp. 591- 602 ,(2001) , 10.1016/S0966-9795(01)00049-8
L.S. Sigl, H.F. Fischmeister, On the fracture toughness of cemented carbides Acta Metallurgica. ,vol. 36, pp. 887- 897 ,(1988) , 10.1016/0001-6160(88)90143-5
K Yoshimi, M.H Yoo, A.A Wereszczak, S.M Borowicz, E.P George, R.H Zee, Yielding and flow behavior of Mo5Si3 single crystals Scripta Materialia. ,vol. 45, pp. 1321- 1326 ,(2001) , 10.1016/S1359-6462(01)01170-8
I Rosales, J.H Schneibel, Stoichiometry and mechanical properties of Mo3Si Intermetallics. ,vol. 8, pp. 885- 889 ,(2000) , 10.1016/S0966-9795(00)00058-3
M.F. Ashby, F.J. Blunt, M. Bannister, Flow characteristics of highly constrained metal wires Acta Metallurgica. ,vol. 37, pp. 1847- 1857 ,(1989) , 10.1016/0001-6160(89)90069-2
C.A. Nunes, R. Sakidja, Z. Dong, J.H. Perepezko, Liquidus projection for the Mo-rich portion of the Mo–Si–B ternary system Intermetallics. ,vol. 8, pp. 327- 337 ,(2000) , 10.1016/S0966-9795(99)00088-6
H. Choe, D. Chen, J.H. Schneibel, R.O. Ritchie, Ambient to high temperature fracture toughness and fatigue-crack propagation behavior in a Mo–12Si–8.5B (at.%) intermetallic Intermetallics. ,vol. 9, pp. 319- 329 ,(2001) , 10.1016/S0966-9795(01)00008-5