Hydrogen Production From Partial Oxidation of Methane Using an AC Rotating Gliding Arc Reactor
作者： Xiao Dong Li , Hao Zhang , Shi Xin Yan , Jian Hua Yan , Chang Ming Du
关键词: Methane reformer 、 Partial oxidation 、 Hydrogen production 、 Chemical reactor 、 Volumetric flow rate 、 Materials science 、 Methane 、 Analytical chemistry 、 Hydrogen 、 Petrochemical
摘要: Hydrogen, as well petrochemical feedstock, can be produced by the partial oxidation of methane in an alternating-current rotating-gliding-arc plasma driven swirling flow. The effects air ratio (0.6 to 1.6), height outer cover (25 and 45 cm), supply voltage (6.6 11.1 kV), gas flow rate (6 18 L/min) on reforming have been investigated. conversion grows with rising ratio, whereas hydrogen selectivity first augments then declines. A higher was beneficial, maximum attains 80.73%. Higher improves reactor performance. As grows, both diminish, while power consumption drops a minimum value 8.23 kJ/L H2 for 16 L/min again amplifies.
harvard.edu
sci-hub.se 参考文章(37)
N. Bellakhal, K. Draou, A. Addou, J.L. Brisset, Cleaning of copper foil coated with sodium hexanoate as corrosion inhibitor Journal of Applied Electrochemistry. ,vol. 30, pp. 595- 600 ,(2000) , 10.1023/A:1003964304448
Lien-Te Hsieh, Wen-Jhy Lee, Chuh-Yung Chen, Moo-Been Chang, Huei-Chuau Chang, CONVERTING METHANE BY USING AN RF PLASMA REACTOR Plasma Chemistry and Plasma Processing. ,vol. 18, pp. 215- 239 ,(1998) , 10.1023/A:1021650516043
Yoon-Cheol Yang, Bong-Ju Lee, Young-Nam Chun, Characteristics of methane reforming using gliding arc reactor Energy. ,vol. 34, pp. 172- 177 ,(2009) , 10.1016/J.ENERGY.2008.11.006
Nongnuch Rueangjitt, Wariya Jittiang, Krittiya Pornmai, Jintana Chamnanmanoontham, Thammanoon Sreethawong, Sumaeth Chavadej, Combined Reforming and Partial Oxidation of CO2-Containing Natural Gas Using an AC Multistage Gliding Arc Discharge System: Effect of Stage Number of Plasma Reactors Plasma Chemistry and Plasma Processing. ,vol. 29, pp. 433- 453 ,(2009) , 10.1007/S11090-009-9191-1
B Benstaali, A Addou, J.L Brisset, Electrochemical and X-ray investigation of austenitic 304L and 316L stainless steels treated by a gliding arc in humid air Materials Chemistry and Physics. ,vol. 78, pp. 214- 221 ,(2003) , 10.1016/S0254-0584(02)00229-8
A INDARTO, J CHOI, H LEE, H SONG, Effect of additive gases on methane conversion using gliding arc discharge Energy. ,vol. 31, pp. 2986- 2995 ,(2006) , 10.1016/J.ENERGY.2005.10.034
Changjun Liu, Abdulathim Marafee, Richard Mallinson, Lance Lobban, Methane conversion to higher hydrocarbons in a corona discharge over metal oxide catalysts with OH groups Applied Catalysis A: General. ,vol. 164, pp. 21- 33 ,(1997) , 10.1016/S0926-860X(97)00154-3
T SREETHAWONG, P THAKONPATTHANAKUN, S CHAVADEJ, Partial oxidation of methane with air for synthesis gas production in a multistage gliding arc discharge system International Journal of Hydrogen Energy. ,vol. 32, pp. 1067- 1079 ,(2007) , 10.1016/J.IJHYDENE.2006.07.013
A. Starikovskiy, A. Gutsol, A. Kemoun, K. Gutsol, T. Nunnally, A. Rabinovich, A. Fridman, Plasma assisted dissociation of hydrogen sulfide International Journal of Hydrogen Energy. ,vol. 37, pp. 1335- 1347 ,(2012) , 10.1016/J.IJHYDENE.2011.10.048
A.-M. Diamy, R. Hrach, V. Hrachová, J.-C. Legrand, Influence of C atom concentration for acetylene production in a CH4/N2 afterglow Vacuum. ,vol. 61, pp. 403- 407 ,(2001) , 10.1016/S0042-207X(01)00151-8