Differences in indentation and wear behaviors between the two sides of thermally tempered soda lime silica glass
作者： Jiaxin Yu , Seong H. Kim , Hongtu He , Hongtu He , Hongshen Liu
DOI: 10.1111/JACE.17872
关键词: Wear resistance 、 Indentation 、 Composite material 、 Toughened glass 、 Soda lime 、 Silica glass 、 Nanoindentation 、 Materials science
摘要: Thermal tempering is an industrial process widely used to make soda lime silica (SLS) glass panels stronger and tougher. During the tempering process, the upper and bottom sides of the glass may experience different cooling rates, and thus, their properties could be different. This study characterized changes in surface composition and subsurface glass network structures as well as indentation and wear resistance properties of the air‐and tin‐sides of 6‐mm‐thick SLS window panels faced toward the upper and sliding roller sides during thermal …
nsf.gov 参考文章(59)
Hongtu He, Linmao Qian, Carlo G. Pantano, Seong H. Kim, Effects of humidity and counter-surface on tribochemical wear of soda-lime-silica glass Wear. ,vol. 342, pp. 100- 106 ,(2015) , 10.1016/J.WEAR.2015.08.016
J.J. Ryu, P. Shrotriya, Mechanical load assisted dissolution response of biomedical cobalt–chromium and titanium metallic alloys: Influence of in-plane stress and chemical environment Wear. ,vol. 332, pp. 662- 668 ,(2015) , 10.1016/J.WEAR.2015.01.071
Shin-ichi Amma, Jiawei Luo, Carlo G. Pantano, Seong H. Kim, Specular reflectance (SR) and attenuated total reflectance (ATR) infrared (IR) spectroscopy of transparent flat glass surfaces: A case study for soda lime float glass Journal of Non-crystalline Solids. ,vol. 428, pp. 189- 196 ,(2015) , 10.1016/J.JNONCRYSOL.2015.08.015
Hongtu He, Seong H. Kim, Linmao Qian, Effects of contact pressure, counter-surface and humidity on wear of soda-lime-silica glass at nanoscale Tribology International. ,vol. 94, pp. 675- 681 ,(2016) , 10.1016/J.TRIBOINT.2015.10.027
Arjun Dey, Riya Chakraborty, Anoop Kumar Mukhopadhyay, Nanoindentation of Soda Lime–Silica Glass: Effect of Loading Rate International Journal of Applied Glass Science. ,vol. 2, pp. 144- 155 ,(2011) , 10.1111/J.2041-1294.2011.00046.X
N. Belkhir, T. Aliouane, D. Bouzid, Correlation between contact surface and friction during the optical glass polishing Applied Surface Science. ,vol. 288, pp. 208- 214 ,(2014) , 10.1016/J.APSUSC.2013.10.008
Q.N. Meng, M. Wen, C.Q. Hu, S.M. Wang, K. Zhang, J.S. Lian, W.T. Zheng, Influence of the residual stress on the nanoindentation-evaluated hardness for zirconiumnitride films Surface & Coatings Technology. ,vol. 206, pp. 3250- 3257 ,(2012) , 10.1016/J.SURFCOAT.2012.01.021
Matthew H. Krohn, John R. Hellmann, Bernard Mahieu, Carlo G. Pantano, Effect of tin-oxide on the physical properties of soda-lime–silica glass Journal of Non-Crystalline Solids. ,vol. 351, pp. 455- 465 ,(2005) , 10.1016/J.JNONCRYSOL.2005.01.050
V. I. Novikov, A. B. Rassada, Refinement of Geodetic Measurements in Construction and Operation of Float-Glass Lines with a Continuous Production Cycle Glass and Ceramics. ,vol. 62, pp. 202- 205 ,(2005) , 10.1007/S10717-005-0072-7
J.R. Varner, H.J. Oel, Surface defects: Their origin, characterization and effects on strength Journal of Non-crystalline Solids. ,vol. 19, pp. 321- 333 ,(1975) , 10.1016/0022-3093(75)90097-6