Creep Crack Growth
作者： S. Floreen
DOI: 10.1007/978-1-4899-1736-2_8
关键词: Stress intensity factor 、 Crack closure 、 Crack growth resistance curve 、 Plasticity 、 Deformation (engineering) 、 Mechanics 、 Stress (mechanics) 、 Dislocation 、 Creep 、 Materials science
摘要: Creep has been a subject of considerable practical and theoretical interest. In recent years, however, there shift in the way creep viewed. earlier times was looked at as plastic deformation process with emphasis on studying flow function time, temperature, stress, etc. Engineering properties concern were typically minimum second stage rates or to reach some amount deformation. Theoretical studies often involved constructing dislocation models account for behavior.
springer.com
sci-hub.st 参考文章(43)
R. J. Dimelfi, W. D. Nix, The stress dependence of the crack growth rate during creep International Journal of Fracture. ,vol. 13, pp. 341- 348 ,(1977) , 10.1007/BF00040148
H. Müllner, J. Ullrich, Amplitude dependence of the internal friction in copper after annealing at low oxygen pressure Scripta Metallurgica. ,vol. 10, pp. 319- 322 ,(1976) , 10.1016/0036-9748(76)90084-3
B. F. Dyson, Constraints on diffusional cavity growth rates Metal science. ,vol. 10, pp. 349- 353 ,(1976) , 10.1179/030634576790431417
K. Sadananda, P. Shahinian, Creep crack growth in udimet 700 Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 9, pp. 79- 84 ,(1978) , 10.1007/BF02647174
R.B. Scarlin, Creep and fatigue crack growth in overaged nickel-base alloys Materials Science and Engineering. ,vol. 30, pp. 55- 64 ,(1977) , 10.1016/0025-5416(77)90079-9
P.W. Davies, R. Dutton, Cavity growth mechanisms during creep Acta Metallurgica. ,vol. 14, pp. 1138- 1140 ,(1966) , 10.1016/0001-6160(66)90208-2
W. Beere, M. V. Speight, Diffusive crack growth in plastically deforming solid Metal science. ,vol. 12, pp. 593- 599 ,(1978) , 10.1179/MSC.1978.12.12.593
David A. Miller, Terence G. Langdon, A cavity growth diagram for high temperature creep Scripta Metallurgica. ,vol. 14, pp. 179- 182 ,(1980) , 10.1016/0036-9748(80)90090-3
D. G. Morris, D. R. Harries, Wedge crack nucleation in Type 316 stainless steel Journal of Materials Science. ,vol. 12, pp. 1587- 1597 ,(1977) , 10.1007/BF00542809
J. M. Larson, S. Floreen, Metallurgical factors affecting the crack growth resistance of a superalloy Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 8, pp. 51- 55 ,(1977) , 10.1007/BF02677263