Tool or instrument with a wear-resistant hard coating for working or processing organic materials
作者： Jurgen Ramm , Erich Bergmann , Hans Schulz , Helmut Daxinger
DOI:
关键词: Forensic engineering 、 Coating 、 Ceramic 、 Titanium nitride 、 Composite material 、 Nitride 、 Chemical vapor deposition 、 Materials science 、 Layer (electronics) 、 Silicon 、 Oxide
摘要: A coated tool or instrument has a wear-resistant hard coating (7) which is preferably titanium nitride for working organic material disposed on separating layer (9) applied basic body (3). The comprises ceramic electrically non-conducting material. Such an oxide, oxynitride of silicon. protects the (3) e.g. non-corrosion resistant steel. During with material, pulsating dc voltage to its holders. pulse height changed during vapor deposition from high negative values low values.
google.co.in 参考文章(19)
R Tucker, Process for producing a corrosion resistant duplex coating ,(1972)
Jones Frederick O, Razor blades having high purity Al2 O3 coating ,(1975)
Takeshi Itaba, Shotaro Matsumoto, Takeshi Abe, Surface-coated blade member of super hard alloy for cutting tools and process for producing same ,(1982)
Suri A. Sastri, Surface coatings and subcoats ,(1984)
Helmut Josef Kaufmann, Dennis T. Quinto, High hardness/high compressive stress multilayer coated tool. ,(1990)
Robert A. Holzl, Deposition method and products ,(1977)
Shin-Ichi Hirano, Susumu Toshiba Tungaloy Co. Ltd. Yamaya, Cubic boron nitride coated material and producing method of the same ,(1986)
Richard J. Penneck, James M. O'Brien, Nicholas J. G. Smith, Stephen J. Duckworth, Wire and cable ,(1984)
Swarnjeet S. Bhatia, Joseph E. Japka, Robert Staffin, Hard surface coatings for metals in fluidized beds ,(1985)
Jean-Paul Terrat, Antoine Gaucher, Method to produce a composite layer resistant to galling, abrasion, corrosion, alternating-stress fatigues, and composite layer produced by this process ,(1981)