A volatile spray zone model and experimentation in a gas-solid fluidized bed with liquid injection
作者： Sihang Tian , Jingyuan Sun , Xiaoqiang Fan , Yao Yang , Zhengliang Huang
DOI: 10.1016/J.CES.2020.116306
关键词: Mechanics 、 Fluidization 、 Fluidized bed 、 Heat transfer 、 Flow (psychology) 、 Pressure drop 、 Mass transfer 、 Porosity 、 Materials science 、 Drag coefficient
摘要: … In a gas-solid fluidized bed, volatile liquid injection results … gas-solid drag coefficient in the volatile spray zone is modified. Simulation results also reasonably describe the bed pressure …
scilit.net参考文章(36)
A.R. Abrahamsen, D. Geldart, Behaviour of gas-fluidized beds of fine powders part I. Homogeneous expansion Powder Technology. ,vol. 26, pp. 35- 46 ,(1980) , 10.1016/0032-5910(80)85005-4
David G Thomas, Transport characteristics of suspension: VIII. A note on the viscosity of Newtonian suspensions of uniform spherical particles Journal of Colloid Science. ,vol. 20, pp. 267- 277 ,(1965) , 10.1016/0095-8522(65)90016-4
Siva Ariyapadi, David W. Holdsworth, Chris J.D. Norley, Franco Berruti, Cedric Briens, Digital X-ray Imaging Technique to Study the Horizontal Injection of Gas-Liquid Jets into Fluidized Beds International Journal of Chemical Reactor Engineering. ,vol. 1, ,(2003) , 10.2202/1542-6580.1114
Subramanya V. Nayak, Saket L. Joshi, Vivek V. Ranade, Modeling of vaporization and cracking of liquid oil injected in a gas¿solid riser Chemical Engineering Science. ,vol. 60, pp. 6049- 6066 ,(2005) , 10.1016/J.CES.2005.04.046
C. Boyer, A. Koudil, P. Chen, M.P. Dudukovic, Study of liquid spreading from a point source in a trickle bed via gamma-ray tomography and CFD simulation Chemical Engineering Science. ,vol. 60, pp. 6279- 6288 ,(2005) , 10.1016/J.CES.2005.03.049
Ning Yang, Jianhua Chen, Wei Ge, Jinghai Li, A conceptual model for analyzing the stability condition and regime transition in bubble columns Chemical Engineering Science. ,vol. 65, pp. 517- 526 ,(2010) , 10.1016/J.CES.2009.06.014
A.R. Abrahamsen, D. Geldart, Behaviour of gas-fluidized beds of fine powders part II. Voidage of the dense phase in bubbling beds Powder Technology. ,vol. 26, pp. 47- 55 ,(1980) , 10.1016/0032-5910(80)85006-6
Zhansheng Shi, Wei Wang, Jinghai Li, A bubble-based EMMS model for gas-solid bubbling fluidization Chemical Engineering Science. ,vol. 66, pp. 5541- 5555 ,(2011) , 10.1016/J.CES.2011.07.020
Matthias Börner, Thomas Hagemeier, Gunnar Ganzer, Mirko Peglow, Evangelos Tsotsas, Experimental spray zone characterization in top-spray fluidized bed granulation Chemical Engineering Science. ,vol. 116, pp. 317- 330 ,(2014) , 10.1016/J.CES.2014.05.007
Jennifer McMillan, David Zhou, Siva Ariyapadi, Cedric Briens, Franco Berruti, Edward Chan, Characterization of the Contact between Liquid Spray Droplets and Particles in a Fluidized Bed Industrial & Engineering Chemistry Research. ,vol. 44, pp. 4931- 4939 ,(2005) , 10.1021/IE049173D