5-axis flank milling free-form surfaces considering constraints
作者： Hu Gong , Ning Wang
DOI: 10.1016/J.CAD.2011.02.005
关键词: Engineering drawing 、 Machining 、 Mechanical engineering 、 Impeller 、 Ball (mathematics) 、 First class constraint 、 Tool path 、 Engineering 、 Free form 、 Flank milling
摘要: … A new tool path generation method of flank milling considering constraints is proposed for ball-end cutters in this paper. It will not only reduce the machining error range but also meet …
elsevier.com
sci-hub.se 参考文章(38)
Ping-Han Wu, Yu-Wei Li, Chih-Hsing Chu, Tool Path Planning for 5-Axis Flank Milling Based on Dynamic Programming Techniques Advances in Geometric Modeling and Processing. pp. 570- 577 ,(2008) , 10.1007/978-3-540-79246-8_49
C. Y. Wu, Arbitrary Surface Flank Milling of Fan, Compressor, and Impeller Blades Journal of Engineering for Gas Turbines and Power. ,vol. 117, pp. 534- 539 ,(1995) , 10.1115/1.2814127
Hu Gong, Ning Wang, Optimize tool paths of flank milling with generic cutters based on approximation using the tool envelope surface Computer-aided Design. ,vol. 41, pp. 981- 989 ,(2009) , 10.1016/J.CAD.2009.06.013
Johanna Senatore, Frédéric Monies, Yann Landon, Walter Rubio, Optimising positioning of the axis of a milling cutter on an offset surface by geometric error minimisation The International Journal of Advanced Manufacturing Technology. ,vol. 37, pp. 861- 871 ,(2008) , 10.1007/S00170-007-1022-Z
F Monies, J-M Redonnet, W Rubio, P Lagarrigue, Improved positioning of a conical mill for machining ruled surfaces: Application to turbine blades: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ,vol. 214, pp. 625- 634 ,(2000) , 10.1243/0954405001518323
Stephen Boyd, Lieven Vandenberghe, Convex Optimization Cambridge University Press. ,(2004)
H.-T. Young, L.-C. Chuang, K. Gerschwiler, S. Kamps, A five-axis rough machining approach for a centrifugal impeller The International Journal of Advanced Manufacturing Technology. ,vol. 23, pp. 233- 239 ,(2004) , 10.1007/S00170-003-1677-Z
A. Lamikiz, L. N. López de Lacalle, O. Ocerin, D. Díez, E. Maidagan, The Denavit and Hartenberg approach applied to evaluate the consequences in the tool tip position of geometrical errors in five-axis milling centres The International Journal of Advanced Manufacturing Technology. ,vol. 37, pp. 122- 139 ,(2008) , 10.1007/S00170-007-0956-5
Chenggang Li, Stephen Mann, Sanjeev Bedi, Error measurements for flank milling Computer-aided Design. ,vol. 37, pp. 1459- 1468 ,(2005) , 10.1016/J.CAD.2005.02.014
John C.J. Chiou, Accurate tool position for five-axis ruled surface machining by swept envelope approach Computer-aided Design. ,vol. 36, pp. 967- 974 ,(2004) , 10.1016/J.CAD.2003.10.001