Effect of Graphite and/or Silicon Carbide Particles Addition on the Hardness and Surface Roughness of Al-4 wt% Mg Alloy
作者： Adel Mahmood Hassan , Ghassan Mousa Tashtoush , Jafar Ahmed Al-Khalil
关键词: Hardness 、 Metal matrix composite 、 Vickers hardness test 、 Composite material 、 Materials science 、 Rockwell scale 、 Graphite 、 Silicon carbide 、 Machinability 、 Surface roughness
摘要: In this study, the fabrication of A1-4wt% Mg-graphite and/or silicon carbide (SiC) particulate composites is described. Composites A1-4 wt% Mg alloy with different volume percentage values graphite SiC particles are prepared using compocasting technique. technique, added into a semi-solid slurry during stirring melt. A pitched blade stirrer used to stir reinforcement in slurry. The then poured metallic mold obtain cast composites. effect addition and porosity content on Rockwell hardness machinability studied present work. results show that porosities increase while decreases particles. But found Surface roughness improves composite, poor surface finish obtained when added.
sagepub.com
harvard.edu
sci-hub.se 参考文章(8)
Melvin M Schwartz, Composite Materials Handbook ,(1984)
L.A Dobrzański, M Adamiak, G.E D'Errico, Relationship between erosion resistance and the phase and chemical composition of PVD coatings deposited onto high-speed steel Journal of Materials Processing Technology. ,vol. 92, pp. 184- 189 ,(1999) , 10.1016/S0924-0136(99)00185-5
T. Miyajima, Y. Iwai, Effects of reinforcements on sliding wear behavior of aluminum matrix composites Wear. ,vol. 255, pp. 606- 616 ,(2003) , 10.1016/S0043-1648(03)00066-8
Yoshiro Iwai, Hidetomo Yoneda, Tomomi Honda, Sliding wear behavior of SiC whisker-reinforced aluminum composite Wear. pp. 594- 602 ,(1995) , 10.1016/0043-1648(95)90175-2
A.R Riahi, A.T Alpas, The role of tribo-layers on the sliding wear behavior of graphitic aluminum matrix composites Wear. ,vol. 251, pp. 1396- 1407 ,(2001) , 10.1016/S0043-1648(01)00796-7
Y Sahin, Preparation and some properties of SiC particle reinforced aluminium alloy composites Materials & Design. ,vol. 24, pp. 671- 679 ,(2003) , 10.1016/S0261-3069(03)00156-0
C.B. Lin, R.J. Chang, W.P. Weng, A study on process and tribological behavior of Al alloy/Gr. (p) composite Wear. ,vol. 217, pp. 167- 174 ,(1998) , 10.1016/S0043-1648(98)00192-6
S.C Sharma, The sliding wear behavior of Al6061–garnet particulate composites Wear. ,vol. 249, pp. 1036- 1045 ,(2001) , 10.1016/S0043-1648(01)00810-9