Finite element analysis of multiple-bolted joints in orthotropic plates
作者： M.U. Rahman , R.E. Rowlands
DOI: 10.1016/0045-7949(93)90148-7
关键词: Stiffness matrix 、 Mechanical joint 、 Structural engineering 、 Bolted joint 、 Contact area 、 Orthotropic material 、 Engineering 、 Fastener 、 Finite element method 、 Structural mechanics
摘要: Abstract A finite element stress analysis of a double-bolted mechanical joint (fastener) in orthotropic members is presented for rigid bolts series with the direction loading. The solves contact stresses and accounts in-plane geometry, bolt clearance, friction, relative motion different load ratios between loading bolts. Although plates are assumed to respond linear elastically, problem nonlinear due change area load.
harvard.edu
elsevier.com
sci-hub.se 参考文章(40)
Calvin O. Cramer, Load Distribution in Multiple-Bolt Tension Joints Journal of the Structural Division. ,vol. 94, pp. 1101- 1118 ,(1968) , 10.1061/JSDEAG.0001946
L. J. Hart-Smith, Mechanically-Fastened Joints for Advanced Composites — Phenomenological Considerations and Simple Analyses Fibrous Composites in Structural Design. pp. 543- 574 ,(1980) , 10.1007/978-1-4684-1033-4_32
Y. J. Chiang, M. U. Rahman, R. E. Rowlands, STRESS AND FAILURE ANALYSIS OF DOUBLE-BOLTED JOINTS IN DOUGLAS-FIR AND SITKA SPRUCE Wood and Fiber Science. ,vol. 23, pp. 567- 589 ,(2007)
L. J. Hart-Smith, Bolted joints in graphite-epoxy composites ,(1976)
MW Hyer, MC Lightfoot, Ultimate Strength of High-Load-Capacity Composite Bolted Joints ASTM International. ,(1979) , 10.1520/STP36906S
Donald W. Oplinger, On the Structural Behavior of Mechanically Fastened Joints in Composite Structures Fibrous Composites in Structural Design. pp. 575- 602 ,(1980) , 10.1007/978-1-4684-1033-4_33
George Stalk, Oscar Orringer, Fracture Mechanics Analysis of Single and Double Rows of Fastener Holes Loaded in Bearing ,(1976)
Thomas Lee Wilkinson, Assessment of Modification Factors for a Row of Bolts or Timber Connectors. Res. Pap. FPL-RP-376. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 24 pages. ,vol. 376, ,(1980) , 10.2737/FPL-RP-376
J. M. Ogonowski, Samuel P. Garbo, Effect of Variances and Manufacturing Tolerances on the Design Strength and Life of Mechanically Fastened Composite Joints ,(1978)
MW Hyer, DH Liu, Photoelastic determination of stresses in multiple-pin connectors - Stresses in the inner lap of double-lapped connectors are determined using transmission photoelastic models Experimental Mechanics. ,vol. 23, pp. 249- 256 ,(1983) , 10.1007/BF02319250