Fracture mechanics based assessment of the fatigue strength: approach for the determination of the initial crack size
作者： U. Zerbst , M. Madia
DOI: 10.1111/FFE.12288
关键词: Crack growth resistance curve 、 Stress concentration 、 Crack size 、 Joint (geology) 、 Fracture mechanics 、 Structural engineering 、 Fracture (geology) 、 Fatigue limit 、 Materials science 、 Welding
摘要: … occurs at material defects due to stiffness or … Such defects can be non-metallic inclusions, secondary phase particles, micropores, blow holes, slag inclusions and other welding defects …
sci-hub.se 参考文章(26)
R. Pippan, M. Berger, H. P. Stüwe, The influence of crack length on fatigue crack growth in deep sharp notches Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 18, pp. 429- 435 ,(1987) , 10.1007/BF02648804
Yukitaka Murakami, Effects of Nonmetallic Inclusions on Fatigue Strength Metal Fatigue#R##N#Effects of Small Defects and Nonmetallic Inclusions. pp. 75- 127 ,(2002) , 10.1016/B978-008044064-4/50006-2
B Tabernig, P Powell, R Pippan, Resistance Curves for the Threshold of Fatigue Crack Propagation in Particle Reinforced Aluminium Alloys ASTM International. ,(2000) , 10.1520/STP13428S
RC McClung, GG Chell, DA Russell, GE Orient, A practical methodology for elastic-plastic fatigue crack growth ASTM special technical publications. pp. 317- 337 ,(1997) , 10.1520/STP16241S
K. Tanaka, Y. Akiniwa, Resistance-curve method for predicting propagation threshold of short fatigue cracks at notches Engineering Fracture Mechanics. ,vol. 30, pp. 863- 876 ,(1988) , 10.1016/0013-7944(88)90146-4
R. L. Lecsek, R. Yee, S. B. Lambert, D. J. Burns, A probabilistic model for initiation and propagation of surface cracks in welded joints Fatigue & Fracture of Engineering Materials & Structures. ,vol. 18, pp. 821- 831 ,(2007) , 10.1111/J.1460-2695.1995.TB00907.X
Mirco D. Chapetti, Leandro F. Jaureguizahar, Fatigue behavior prediction of welded joints by using an integrated fracture mechanics approach International Journal of Fatigue. ,vol. 43, pp. 43- 53 ,(2012) , 10.1016/J.IJFATIGUE.2012.02.004
A. J. McEVILY, M. ENDO, Y. MURAKAMI, On the relationship and the short fatigue crack threshold Fatigue & Fracture of Engineering Materials & Structures. ,vol. 26, pp. 269- 278 ,(2003) , 10.1046/J.1460-2695.2003.00636.X
B Tabernig, R Pippan, Determination of the length dependence of the threshold for fatigue crack propagation Engineering Fracture Mechanics. ,vol. 69, pp. 899- 907 ,(2002) , 10.1016/S0013-7944(01)00129-1
Mauro Madia, Diya Arafah, Uwe Zerbst, Reference load solutions for plates with semi-elliptical surface cracks subjected to biaxial tensile loading International Journal of Pressure Vessels and Piping. ,vol. 119, pp. 19- 28 ,(2014) , 10.1016/J.IJPVP.2014.02.004