The Characteristics of Acoustic Emission Signal under Composite Destruction on GFRP Gas Cylinder

作者: Hyun-Sup Jee , Jong-O Lee , No-Hoe Ju , Cheal Ho So , Jong-Kyu Lee

DOI: 10.7779/JKSNT.2013.33.5.430

关键词: Materials scienceGlass fiberGas cylinderComposite materialAcoustic emissionBreakageSignalCylinderFibre-reinforced plasticAmplitude

摘要: This study is investigation of the characteristics for acoustic emission signal generated by destruction on glass fiber bundles and specimen that was machined composite materials surrounding outside GFRP cylinder. The Amplitude gets bigger as cutting angle knife increases. Accordingly, number hits in have more longitudinal direction (longitudinal to fiber) than hoop (horizontal while amplitude signals were direction. It found out breakage 40 dB matrix crack less because not observed when threshold value suddenly appered 32 dB. slope related source horizontal vertical directions are 0.16 0.08. In particular, appear similar therefore Acoustic estimated breakage.

参考文章(5)
Mitsuo Ozawa, Shinya Uchida, Toshiro Kamada, Hiroaki Morimoto, Study of mechanisms of explosive spalling in high-strength concrete at high temperatures using acoustic emission Construction and Building Materials. ,vol. 37, pp. 621- 628 ,(2012) , 10.1016/J.CONBUILDMAT.2012.06.070
Hyun-Sup Jee, Jong-O Lee, No-Hoe Ju, Jong-Kyu Lee, Cheal-Ho So, Distribution of Acoustic Emission Parameters during Load Holding for CNG Vehicle Fuel Tank Korean Journal of Materials Research. ,vol. 21, pp. 623- 627 ,(2011) , 10.3740/MRSK.2011.21.11.623
Giang T. Pham, Ben Wang, Sang Woo Kim, Young-Bin Park, Smart Structural Health Monitoring Using Carbon Nanotube Polymer Composites Composites Research. ,vol. 22, pp. 1- 6 ,(2009)
A.A. Pollock, Acoustic emission - 2: Acoustic emission amplitudes Non-destructive Testing. ,vol. 6, pp. 264- 269 ,(1973) , 10.1016/0029-1021(73)90074-1