Influence of Nepheline Syenite on Mechanical Reliability of Ceramic Raschig Rings
作者： Nazila Rostami , Amin Salem , Alireza Paknjhad
DOI: 10.1111/J.1744-7402.2009.02435.X
关键词:
摘要: The influence of nepheline syenite on physicomechanical properties extruded ceramic Raschig ring was investigated. Industrial kaolin used as reference composition and different amounts were replaced with ranging 5–15 wt%. laboratory experimental results showed that the use 5 wt% in improves final product characteristics. This mix also maximum mechanical compressive strength reliability attributed to improve microstructural homogeneity. On comparing chemical resistance data, it found optimum condition for obtaining satisfactorily covers resistance.
sci-hub.se 参考文章(9)
Hayne Palmour, William Wurth Kriegel, Mechanical properties of engineering ceramics : proceedings of a Conference conducted by the School of Engineering and the College Extension Division, North Carolina State College, in cooperation with the Office of Ordnance Research, U. S. Army, at Raleigh, North Carolina, March 9-11, 1960 Interscience Publishers. ,(1961)
J.M. Villora, P. Callejas, M.F. Barba, C. Baudı́n, Statistical analysis of the fracture behaviour of porous ceramic Raschig rings Journal of The European Ceramic Society. ,vol. 24, pp. 589- 594 ,(2004) , 10.1016/S0955-2219(03)00245-0
L. Esposito, A. Salem, A. Tucci, A. Gualtieri, S.H. Jazayeri, THE USE OF NEPHELINE-SYENITE IN A BODY MIX FOR PORCELAIN STONEWARE TILES Ceramics International. ,vol. 31, pp. 233- 240 ,(2005) , 10.1016/J.CERAMINT.2004.05.006
Y. Iqbal, P.F. Messer, W.E. Lee, Non-equilibrium microstructure of bone china British Ceramic Transactions. ,vol. 99, pp. 110- 116 ,(2000) , 10.1179/096797800680811
M. Salehi, A. Salem, Effect of moisture content on extrusion process of kaolinitic–illitic clay in manufacturing of ceramic Raschig ring Journal of Materials Processing Technology. ,vol. 200, pp. 232- 237 ,(2008) , 10.1016/J.JMATPROTEC.2007.09.013
K. Trustrum, A. De S. Jayatilaka, On estimating the Weibull modulus for a brittle material Journal of Materials Science. ,vol. 14, pp. 1080- 1084 ,(1979) , 10.1007/BF00561290
Mehdi Salehi, Amin Salem, Influence of sintering temperature on microstructural changes of ceramic Raschig ring Korean Journal of Chemical Engineering. ,vol. 26, pp. 500- 505 ,(2009) , 10.1007/S11814-009-0085-Y
William M. Carty, Udayan Senapati, Porcelain—Raw Materials, Processing, Phase Evolution, and Mechanical Behavior Journal of the American Ceramic Society. ,vol. 81, pp. 3- 20 ,(1998) , 10.1111/J.1151-2916.1998.TB02290.X
A. Salem, M. Salehi, Statistical analysis of compressive strength data of ceramic Raschig rings fabricated by an extrusion process using a Weibull distribution Journal of Ceramic Processing Research. ,vol. 9, pp. 167- 171 ,(2008) , 10.36410/JCPR.2008.9.2.167