Thermodynamic Analysis of Separation Systems

作者: Yaşar Demirel

DOI: 10.1081/SS-200041152

关键词:

摘要: … approaches and the thermodynamic analysis to reduce energy cost, thermodynamic cost, and … Some case studies of cost reduction based on the thermodynamic analysis are also …

参考文章(113)
Omar Annakou, Peter Mizsey, Rigorous investigation of heat pump assisted distillation Heat Recovery Systems and CHP. ,vol. 15, pp. 241- 247 ,(1995) , 10.1016/0890-4332(95)90008-X
Ruchira Taprap, Masaru Ishida, Graphic exergy analysis of processes in distillation column by energy‐utilization diagrams Aiche Journal. ,vol. 42, pp. 1633- 1641 ,(1996) , 10.1002/AIC.690420615
M. J. Andrecovich, A. W. Westerberg, An MILP formulation for heat-integrated distillation sequence synthesis Aiche Journal. ,vol. 31, pp. 1461- 1474 ,(1985) , 10.1002/AIC.690310908
F. W. Bruckmiller, L. E. Jackson, Exergy Analysis of Cryogenic Air Separation Process for Generating Nitrogen Journal of Industrial and Engineering Chemistry. ,vol. 8, pp. 499- 505 ,(1916) , 10.1021/I500006A006
W. E. JONES, A. M. VMS;, J. A. WILSON, GETTING THE MAXIMUM BENEFIT FROM A SIDE-REBOILER Chemical Engineering Communications. ,vol. 171, pp. 195- 209 ,(1999) , 10.1080/00986449908912757
S. Ray, Asim K. Panja, S.P. Sengupta, Irreversibility analysis of a separation system using sieve tray distillation column Chemical Engineering Science. ,vol. 49, pp. 1472- 1477 ,(1994) , 10.1016/0009-2509(94)85073-9
Signe Kjelstrup Ratkje, Jakob De Swaan Arons, Denbigh revisited: Reducing lost work in chemical processes Chemical Engineering Science. ,vol. 50, pp. 1551- 1560 ,(1995) , 10.1016/0009-2509(94)00469-8
E.S. Fraga, A. Z̆ilinskas, Evaluation of hybrid optimization methods for the optimal design of heat integrated distillation sequences Advances in Engineering Software. ,vol. 34, pp. 73- 86 ,(2003) , 10.1016/S0965-9978(02)00125-4
Vasile Lavric, Danielle Baetens, Valentin Pleşu, Jacques De Ruyck, Entropy generation reduction through chemical pinch analysis Applied Thermal Engineering. ,vol. 23, pp. 1837- 1845 ,(2003) , 10.1016/S1359-4311(03)00137-6