Conventional and advanced exergoenvironmental analysis of a steam methane reforming reactor for hydrogen production
作者： A. Boyano , T. Morosuk , A.M. Blanco-Marigorta , G. Tsatsaronis
DOI: 10.1016/J.JCLEPRO.2011.07.027
关键词:
摘要: Abstract This paper investigates the environmental aspects of a steam methane reformer technology and highlights potential for improving through conventional an advanced exergoenvironmental analysis. An analysis is complex based on combination exergetic Life Cycle Assessment (LCA). conducted at component level identifies options reducing overall impact. To evaluate thermodynamic performance effectiveness to estimate its realistic improvement, it necessary know (a) avoidable part exergy destruction (irreversibilities) within component, (b) impact associated with it. Improvement efforts should be then focused only these parts. The impacts both component-related are calculated in As result, some suggestions design made.
ulpgc.es
elsevier.com
sci-hub.se 参考文章(17)
Adrian Bejan, George Tsatsaronis, Michael J Moran, None, Thermal design and optimization ,(1995)
Yoon-Cheol Yang, Bong-Ju Lee, Young-Nam Chun, Characteristics of methane reforming using gliding arc reactor Energy. ,vol. 34, pp. 172- 177 ,(2009) , 10.1016/J.ENERGY.2008.11.006
Goedkoop, The Eco-indicator 99, A damage oriented method for Life Cycle Impact Assessment Methodology Report. ,(1999)
Nobuyuki Gokon, Yusuke Osawa, Daisuke Nakazawa, Tatsuya Kodama, Kinetics of CO2 Reforming of Methane by Catalytically Activated Metallic Foam Absorber for Solar Receiver-Reactors International Journal of Hydrogen Energy. ,vol. 34, pp. 1787- 1800 ,(2008) , 10.1016/J.IJHYDENE.2008.12.018
G. Tsatsaronis, T. Morosuk, A General Exergy-Based Method for Combining a Cost Analysis With an Environmental Impact Analysis: Part I — Theoretical Development Volume 8: Energy Systems: Analysis, Thermodynamics and Sustainability; Sustainable Products and Processes. pp. 453- 462 ,(2008) , 10.1115/IMECE2008-67218
Frank Cziesla, George Tsatsaronis, Zengliang Gao, Avoidable thermodynamic inefficiencies and costs in an externally fired combined cycle power plant Energy. ,vol. 31, pp. 1472- 1489 ,(2006) , 10.1016/J.ENERGY.2005.08.001
M.A. El-Bousiffi, D.J. Gunn, A dynamic study of steam-methane reforming International Journal of Heat and Mass Transfer. ,vol. 50, pp. 723- 733 ,(2007) , 10.1016/J.IJHEATMASSTRANSFER.2006.07.006
George Tsatsaronis, Moung-Ho Park, ON AVOIDABLE AND UNAVOIDABLE EXERGY DESTRUCTIONS AND INVESTMENT COSTS IN THERMAL SYSTEMS Energy Conversion and Management. ,vol. 43, pp. 1259- 1270 ,(2002) , 10.1016/S0196-8904(02)00012-2
A. Boyano, A.M. Blanco-Marigorta, T. Morosuk, G. Tsatsaronis, Exergoenvironmental analysis of a steam methane reforming process for hydrogen production Energy. ,vol. 36, pp. 2202- 2214 ,(2011) , 10.1016/J.ENERGY.2010.05.020
George Tsatsaronis, Definitions and nomenclature in exergy analysis and exergoeconomics Energy. ,vol. 32, pp. 249- 253 ,(2007) , 10.1016/J.ENERGY.2006.07.002