Effect of Hot Band Annealing Processes on Microstructure, Texture and r-Value of Ferritic Stainless Steel
作者： Xin Zhang , Wei Du , Lai-zhu Jiang , Quan-she Sun , Zhen-yu Liu
DOI: 10.1016/S1006-706X(10)60157-4
关键词:
摘要: The effect of hot band annealing processes, namely simulating batch and continuous annealing, on microstructure, texture, grain boundary character r-value ferritic stainless steel was investigated. displayed a highly elongated ribbon-like structure pronounced deformation texture. fully recrystallized grains were observed after while the “typical” rolled remained annealing. Also, α-fibre texture formed during rolling almost disappeared weak γ-fibre obtained. By contract, very stable After cold recrystallization favorable achieved in annealed steel. Instead forming notably shifted toward {223} Finally, improvement drawability with high low Δr-value also sheet through initial process.
springer.com
elsevier.com
sci-hub.se 参考文章(16)
Ichiro Tsukatani, Effect of Hot Band Microstructural Factors on Recrystallization Texture in Ti-added Ultra-low Carbon Cold-rolled Sheet Steels Isij International. ,vol. 38, pp. 625- 632 ,(1998) , 10.2355/ISIJINTERNATIONAL.38.625
SooHo Park, KwangYuk Kim, YongDeuk Lee, ChanGyung Park, Evolution of microstructure and texture associated with ridging in ferritic stainless steels Isij International. ,vol. 42, pp. 100- 105 ,(2002) , 10.2355/ISIJINTERNATIONAL.42.100
R. K. Ray, J. J. Jonas, R. E. Hook, Cold rolling and annealing textures in low carbon and extra low carbon steels International Materials Reviews. ,vol. 39, pp. 129- 172 ,(1994) , 10.1179/IMR.1994.39.4.129
Hyung-Joon Shin, Joong-Kyu An, Soo Ho Park, Dong Nyung Lee, The effect of texture on ridging of ferritic stainless steel Acta Materialia. ,vol. 51, pp. 4693- 4706 ,(2003) , 10.1016/S1359-6454(03)00187-3
P. Lin, G. Palumbo, J. Harase, K.T. Aust, Coincidence Site Lattice (CSL) grain boundaries and Goss texture development in Fe-3% Si alloy Acta Materialia. ,vol. 44, pp. 4677- 4683 ,(1996) , 10.1016/S1359-6454(96)00140-1
Jun-ichi Hamada, Yoshinori Matsumoto, Fumio Fudanoki, Shigeru Maeda, Effect of Initial Solidified Structure on Ridging Phenomenon and Texture in Type 430 Ferritic Stainless Steel Sheets ISIJ International. ,vol. 43, pp. 1989- 1998 ,(2003) , 10.2355/ISIJINTERNATIONAL.43.1989
Dingqiang Li, S.I. Wright, C.J. Boehlert, The grain boundary character distribution of a fully-orthorhombic Ti–25Al–24Nb(at.%) alloy Scripta Materialia. ,vol. 51, pp. 545- 550 ,(2004) , 10.1016/J.SCRIPTAMAT.2004.05.045
C. W. Sinclair, J. -D. Mithieux, J. -H. Schmitt, Y. Bréchet, Recrystallization of stabilized ferritic stainless steel sheet Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 36, pp. 3205- 3215 ,(2005) , 10.1007/S11661-005-0091-6
I. Tikhovskiy, D. Raabe, F. Roters, Simulation of the deformation texture of a 17%Cr ferritic stainless steel using the texture component crystal plasticity finite element method considering texture gradients Scripta Materialia. ,vol. 54, pp. 1537- 1542 ,(2006) , 10.1016/J.SCRIPTAMAT.2005.12.038
Yoshihiro Yazawa, Mineo Muraki, Yasushi Kato, Oasmu Furukimi, Effect of Chromium Content on Relationship Between r-value and {111} Recrystallization Texture in Ferritic Steel ISIJ International. ,vol. 43, pp. 1647- 1651 ,(2003) , 10.2355/ISIJINTERNATIONAL.43.1647