Abrasive Wear Volume Maps for PA6 and PA6 Composites Under Dry Working Condition
作者： A. Mimaroglu , U. Sen , H. Unal
DOI: 10.1007/S10443-008-9054-6
关键词:
摘要: In this study the wear volume map is obtained and considered for evaluation of abrasive performance polyamide (PA6) PA6 composites. Polyamide composites were tailored using 25 wt.% glass bead, 20 talc 30 wollastonite fillers. work, influence filler materials, abrasion surface roughness applied loading values on evaluated. Experimental tests carried out at atmospheric condition pin-on-disc rig arrangement. Tests performed under 4, 6, 8 10 N load values, traveling speed 1 m/s 5, 45 μm. Wear maps results showed that lowest rate PA reached bead filler. Furthermore, also higher surface, rate. Finally it concluded process mechanism include ploughing delimitation tips.
springer.com
harvard.edu
sci-hub.se 参考文章(20)
A. D. Sarkar, Friction and wear ,(1980)
M Palabiyik, S Bahadur, Tribological studies of polyamide 6 and high-density polyethylene blends filled with PTFE and copper oxide and reinforced with short glass fibers Wear. ,vol. 253, pp. 369- 376 ,(2002) , 10.1016/S0043-1648(02)00144-8
B. Vishwanath, A.P. Verma, C.V.S.Kameswara Rao, Effect of reinforcement on friction and wear of fabric reinforced polymer composites Wear. ,vol. 167, pp. 93- 99 ,(1993) , 10.1016/0043-1648(93)90313-B
R.I Trezona, I.M Hutchings, Three-body abrasive wear testing of soft materials Wear. ,vol. 233, pp. 209- 221 ,(1999) , 10.1016/S0043-1648(99)00183-0
J.K. Lancaster, Abrasive wear of polymers Wear. ,vol. 14, pp. 223- 239 ,(1969) , 10.1016/0043-1648(69)90047-7
J. Bijwe, C.M. Logani, U.S. Tewari, Influence of fillers and fibre reinforcement on abrasive wear resistance of some polymeric composites Wear. ,vol. 138, pp. 77- 92 ,(1990) , 10.1016/0043-1648(90)90169-B
P. Mareri, S. Bastide, N. Binda, A. Crespy, Mechanical behaviour of polypropylene composites containing fine mineral filler: Effect of filler surface treatment Composites Science and Technology. ,vol. 58, pp. 747- 752 ,(1998) , 10.1016/S0266-3538(97)00156-5
J Indumathi, J Bijwe, A.K Ghosh, M Fahim, N Krishnaraj, Wear of cryo-treated engineering polymers and composites Wear. pp. 343- 353 ,(1999) , 10.1016/S0043-1648(99)00063-0
A.P. Harsha, U.S. Tewari, Two-body and three-body abrasive wear behaviour of polyaryletherketone composites Polymer Testing. ,vol. 22, pp. 403- 418 ,(2003) , 10.1016/S0142-9418(02)00121-6
Theo A. Tervoort, Jeroen Visjager, Paul Smith, On Abrasive Wear of Polyethylene Macromolecules. ,vol. 35, pp. 8467- 8471 ,(2002) , 10.1021/MA020579G