Rheology and microstructural development of a Al–4wt%Cu alloy in the semi-solid state

作者: M. Ferrante , E. de Freitas

DOI: 10.1016/S0921-5093(99)00226-9

关键词:

摘要: Abstract Rheological and microstructural studies were performed on a Al–4wt%Cu alloy in the semi-solid state employing two different experimental techniques: indentation test simple compression test. Results showed that recrystallized microstructures exhibit lower viscosities than dendritic rheological behavior can be described by Power Law. The viscosity values analyzed terms of solid volume fraction deformation rate pseudoplasticity was thus ascertained. As for particle size shape evolution within temperature range, growth kinetics obeyed classic D 3 = K c t relation, which indicates Ostwald Ripening type growth, but particles distribution wider one predicted LSW theory. Also, comparison theoretical constants suggested coarsening due to hard impingement main mechanism.

参考文章(18)
G CSEH, N. Q CHINH, P TASNADI, P SZOMMER, A JUHASZ, Indentation tests for the investigation of the plasticity of glasses Journal of Materials Science. ,vol. 32, pp. 1733- 1739 ,(1997) , 10.1023/A:1018524016505
Su sok Kang, Duk N. Yoon, Kinetics of grain coarsening during sintering of Co-Cu and Fe-Cu Alloys with low liquid contents Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 13, pp. 1405- 1411 ,(1982) , 10.1007/BF02642878
V. Laxmanan, M. C. Flemings, Deformation of semi-solid Sn-15 Pct Pb alloy Metallurgical Transactions A. ,vol. 11, pp. 1927- 1937 ,(1980) , 10.1007/BF02655112
S. Takajo, W.A. Kaysser, G. Petzow, Analysis of particle growth by coalescence during liquid phase sintering Acta Metallurgica. ,vol. 32, pp. 107- 113 ,(1984) , 10.1016/0001-6160(84)90207-4
T.Z. Kattamis, T.J. Piccone, Rheology of semisolid Al-4.5%Cu-1.5%Mg alloy Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 131, pp. 265- 272 ,(1991) , 10.1016/0921-5093(91)90403-A
T. H. Courtney, Microstructural evolution during liquid phase sintering: Part I. Development of microstructure Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 8, pp. 679- 684 ,(1977) , 10.1007/BF02664776
T.G. Nguyen, D. Favier, M. Suery, Theoretical and experimental study of the isothermal mechanical behaviour of alloys in the semi-solid state International Journal of Plasticity. ,vol. 10, pp. 663- 693 ,(1994) , 10.1016/0749-6419(94)90028-0
I.M. Lifshitz, V.V. Slyozov, The kinetics of precipitation from supersaturated solid solutions Journal of Physics and Chemistry of Solids. ,vol. 19, pp. 35- 50 ,(1961) , 10.1016/0022-3697(61)90054-3
Y.S. Yang, C.-Y.A. Tsao, Thixotropic behavior and structure evolution of A356 alloy in the semisolid state Scripta Metallurgica Et Materialia. ,vol. 30, pp. 1541- 1546 ,(1994) , 10.1016/0956-716X(94)90305-0
P. W. Voorhees, M. E. Glicksman, Ostwald ripening during liquid phase sintering—Effect of volume fraction on coarsening kinetics Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 15, pp. 1081- 1088 ,(1984) , 10.1007/BF02644701