Enhancement of copper recovery by acid leaching of high-mud copper oxides: A case study at Yangla Copper Mine, China

作者: Shenghua Yin , Leiming Wang , Aixiang Wu , Michael L. Free , Eugie Kabwe

DOI: 10.1016/J.JCLEPRO.2018.08.122

关键词:

摘要: Abstract Poor permeability, high mud and impurities contents, severe curing conditions ore complexity are primary challenges faced by Yangla Copper Mine (YCM) during acid leaching, resulting in a poor 1% copper extraction after 3 months of traditional leaching. A series technological improvements, which included antiscalant addition, washing, classified crushing screening, thin-layer conveying dumping, mechanical/chemical activation, were applied YCM to enhance heap permeability from low-grade oxides. These improvements increased over 60 the production cathode reached 2500 t/a. Related topics such as: surface erosion, particle size distribution, structure, irrigation rate, passivation its effects also discussed this study. Even though some relevant mechanisms for enhanced recovery still being studied, successful industrial case provides good reference oxide mines encountering similar problems.

参考文章(41)
Mbuyu Lwambiyi, Kasonde Maweja, Kitala Kongolo, Nkulu M. Lwambiyi, Mukulu Diyambi, Investigation into the heap leaching of copper ore from the Disele deposit Hydrometallurgy. ,vol. 98, pp. 177- 180 ,(2009) , 10.1016/J.HYDROMET.2009.04.016
Nikhil Dhawan, M. Sadegh Safarzadeh, Jan D. Miller, Michael S. Moats, Raj K. Rajamani, Crushed ore agglomeration and its control for heap leach operations Minerals Engineering. ,vol. 41, pp. 53- 70 ,(2013) , 10.1016/J.MINENG.2012.08.013
Keith Quast, Danfeng Xu, William Skinner, Ataollah Nosrati, Tom Hilder, David J. Robinson, Jonas Addai-Mensah, Column leaching of nickel laterite agglomerates: Effect of feed size Hydrometallurgy. ,vol. 134, pp. 144- 149 ,(2013) , 10.1016/J.HYDROMET.2013.02.001
Jorcy Y. Trujillo, Luis A. Cisternas, Edelmira D. Gálvez, Mario E. Mellado, Optimal design and planning of heap leaching process. Application to copper oxide leaching Chemical Engineering Research & Design. ,vol. 92, pp. 308- 317 ,(2014) , 10.1016/J.CHERD.2013.07.027
Mario E. Mellado, Edelmira D. Gálvez, Luis A. Cisternas, On the optimization of flow rates on copper heap leaching operations International Journal of Mineral Processing. ,vol. 101, pp. 75- 80 ,(2011) , 10.1016/J.MINPRO.2011.07.011
Zeynal Abiddin Erguler, Güzide Kalyoncu Erguler, The effect of particle size on acid mine drainage generation: Kinetic column tests Minerals Engineering. ,vol. 76, pp. 154- 167 ,(2015) , 10.1016/J.MINENG.2014.10.002
H.M. Lizama, J.R. Harlamovs, D.J. McKay, Z. Dai, Heap leaching kinetics are proportional to the irrigation rate divided by heap height Minerals Engineering. ,vol. 18, pp. 623- 630 ,(2005) , 10.1016/J.MINENG.2004.12.012
M.R. Shayestehfar, S. Karimi Nasab, H. Mohammadalizadeh, Mineralogy, petrology, and chemistry studies to evaluate oxide copper ores for heap leaching in Sarcheshmeh copper mine, Kerman, Iran. Journal of Hazardous Materials. ,vol. 154, pp. 602- 612 ,(2008) , 10.1016/J.JHAZMAT.2007.10.100