Modelling of Technological Parameters of Aluminium Melt Refining in the Ladle by Blowing of Inert Gas through the Rotating Impeller
作者： Markéta Tkadlečková , Karel Michalek , Mariola Saternus , Josef Walek
DOI: 10.3390/MET11020284
关键词:
摘要: The presented paper deals with the use of physical modelling to study the degassing process of aluminium melts in the refining ladle by blowing inert gas through a rotating …
mdpi.com
sci-hub.st 参考文章(16)
M. Saternus, T. Merder, J. Pieprzyca, The Influence of Impeller Geometry on the Gas Bubbles Dispersion in Uro-200 Reactor – RTD Curves / Wpływ Rodzaju Wirnika Na Dyspersję Pęcherzyków Gazowych W Reaktorze URO-200 – Krzywe Mieszania Archives of Metallurgy and Materials. ,vol. 60, pp. 2887- 2894 ,(2015) , 10.1515/AMM-2015-0461
Ernesto Mancilla, Wiener Cruz-Méndez, Isaías E. Garduño, Carlos González-Rivera, Marco Aurelio Ramírez-Argáez, Gabriel Ascanio, Comparison of the hydrodynamic performance of rotor-injector devices in a water physical model of an aluminum degassing ladle Chemical Engineering Research & Design. ,vol. 118, pp. 158- 169 ,(2017) , 10.1016/J.CHERD.2016.11.031
Takuya Yamamoto, Aire Suzuki, Sergey V. Komarov, Yasuo Ishiwata, Investigation of impeller design and flow structures in mechanical stirring of molten aluminum Journal of Materials Processing Technology. ,vol. 261, pp. 164- 172 ,(2018) , 10.1016/J.JMATPROTEC.2018.06.012
Mariola Saternus, Tomasz Merder, Physical Modelling of Aluminum Refining Process Conducted in Batch Reactor with Rotary Impeller Metals. ,vol. 8, pp. 726- ,(2018) , 10.3390/MET8090726
Diego Abreu-López, Abhishek Dutta, José Luis Camacho-Martínez, Gerardo Trápaga-Martínez, Marco A Ramírez-Argáez, None, Mass Transfer Study of a Batch Aluminum Degassing Ladle with Multiple Designs of Rotating Impellers JOM. ,vol. 70, pp. 2958- 2967 ,(2018) , 10.1007/S11837-018-3147-Y
Guili Gao, Ming Wang, Dequan Shi, Yingfang Kang, Simulation of Bubble Behavior in a Water Physical Model of an Aluminum Degassing Ladle Unit Employing Compound Technique of Rotary Blowing and Ultrasonic Metallurgical and Materials Transactions B-process Metallurgy and Materials Processing Science. ,vol. 50, pp. 1997- 2005 ,(2019) , 10.1007/S11663-019-01607-Y
Jacek Pieprzyca, Karel Gryc, Markéta Tkadlečková, Karel Michalek, Mariola Saternus, Tomasz Merder, Ladislav Socha, Physical Modelling of Degassing Process by Blowing of Inert Gas Archives of Metallurgy and Materials. ,(2018) , 10.24425/122432
Z. C. Hu, E. L. Zhang, S. Y. Zeng, Degassing of magnesium alloy by rotating impeller degasser: Part 1 – Mathematical modelling Materials Science and Technology. ,vol. 24, pp. 1304- 1308 ,(2008) , 10.1179/174328407X161312
Liping Wang, Erjun Guo, Yongchang Huang, Bin Lu, Rotary impeller refinement of 7075Al alloy Rare Metals. ,vol. 28, pp. 309- 312 ,(2009) , 10.1007/S12598-009-0060-0
E. Zhang, G. J. Wang, Z. C. Hu, Degassing of magnesium alloy by rotating impeller degasser Part 2 – effect on microstructure and mechanical properties Materials Science and Technology. ,vol. 26, pp. 1253- 1258 ,(2010) , 10.1179/174328409X443173