Cable lead-through grommet for bulkhead in motor vehicles

作者： Erwin Kaespaizer , Rudolf Wagner , Johann Brunner

DOI:

关键词:

摘要: The lead-through grommet has a peripheral sealing and retaining lip (3,4) plus at least one slit (5) from the periphery to central hole (2) allow insertion of cables. two edge faces bounding are fixed in position by coupling element(10) that bridges over slit. There other holes which have membrane them can be pierced slits branch off main these. element is like clamp removed. openings near into legs fit.

google.com 本地加速

freepatentsonline.com 本地加速

freepatentsonline.com UNKNOWN 下载加速

lens.org UNKNOWN 下载加速

参考文章(7)

Weber Kurt, Feedthrough cable guide for sealed connector or distributor housing - uses resilient insert with cable bore fitted in rounded slot in housing side edge ,(1991)

Peter Dipl.-Ing. Steinmetz, Ernst Bachel, Cable inlet sealing member ,(1990)

Burkhardt Michael, Socket-and-holder system by means of which socket can be snap-fitted in holder - has at least two tongues provided at their free ends with projecting spring locking catches lying opposite each other spaced at distance ,(1994)

Andreas Marloth, Bernd Horrmeyer, Sealing system for cables or pipes led through wall - uses lead=in two=partgrommet insertable in wall passageway ,(1990)

Zachrai Juergen, Cable lead-in entrance ,(1995)

Bruno Ehmann, Rainer Funk, Socket connector for cable, conductor or hose ,(1994)

Gorski Ekkhard, Sealing system for lines ,(1987)