Integration of a PEM fuel cell with a metal hydride tank for stationary applications
作者： P. Rizzi , E. Pinatel , C. Luetto , P. Florian , A. Graizzaro
DOI: 10.1016/J.JALLCOM.2014.12.145
关键词:
摘要: … and hydride tanks designed for stationary applications is described. The work was focused on different aspects related to the development of the metal hydride … new energy storage units …
elsevier.com
sci-hub.se 参考文章(14)
María José Lavorante, Luciano Gurevich Messina, Juan Isidro Franco, Pablo Bonelli, Design of an integrated power system using a proton exchange membrane fuel cell International Journal of Hydrogen Energy. ,vol. 39, pp. 8631- 8634 ,(2014) , 10.1016/J.IJHYDENE.2013.12.071
G MOHAN, M PRAKASHMAIYA, S SRINIVASAMURTHY, Performance simulation of metal hydride hydrogen storage device with embedded filters and heat exchanger tubes International Journal of Hydrogen Energy. ,vol. 32, pp. 4978- 4987 ,(2007) , 10.1016/J.IJHYDENE.2007.08.007
Michael Lee, Kwang J Kim, Ryan R Hopkins, Keith Gawlik, None, Thermal conductivity measurements of copper-coated metal hydrides (LaNi5, Ca0.6Mm0.4Ni5, and LaNi4.75Al0.25) for use in metal hydride hydrogen compression systems International Journal of Hydrogen Energy. ,vol. 34, pp. 3185- 3190 ,(2009) , 10.1016/J.IJHYDENE.2009.01.078
Kwang J Kim, Blanca Montoya, Arsalan Razani, K.-H Lee, Metal hydride compacts of improved thermal conductivity International Journal of Hydrogen Energy. ,vol. 26, pp. 609- 613 ,(2001) , 10.1016/S0360-3199(00)00115-4
A. Souahlia, H. Dhaou, S. Mellouli, F. Askri, A. Jemni, S. Ben Nasrallah, Experimental study of metal hydride-based hydrogen storage tank at constant supply pressure International Journal of Hydrogen Energy. ,vol. 39, pp. 7365- 7372 ,(2014) , 10.1016/J.IJHYDENE.2014.02.121
T. Førde, J. Eriksen, A.G. Pettersen, P.J.S. Vie, Ø. Ulleberg, Thermal integration of a metal hydride storage unit and a PEM fuel cell stack International Journal of Hydrogen Energy. ,vol. 34, pp. 6730- 6739 ,(2009) , 10.1016/J.IJHYDENE.2009.05.146
Siddhartha Kumar Khaitan, Mandhapati Raju, Discharge dynamics of coupled fuel cell and metal hydride hydrogen storage bed for small wind hybrid systems International Journal of Hydrogen Energy. ,vol. 37, pp. 2344- 2352 ,(2012) , 10.1016/J.IJHYDENE.2011.10.098
C. Bossi, A. Del Corno, M. Scagliotti, C. Valli, Characterisation of a 3kW PEFC power system coupled with a metal hydride H2 storage Journal of Power Sources. ,vol. 171, pp. 122- 129 ,(2007) , 10.1016/J.JPOWSOUR.2006.11.006
P.R. Wilson, R.C. Bowman, J.L. Mora, J.W. Reiter, Operation of a PEM fuel cell with LaNi4.8Sn0.2 hydride beds Journal of Alloys and Compounds. ,vol. 446, pp. 676- 680 ,(2007) , 10.1016/J.JALLCOM.2007.02.162
T BROWN, J BROUWER, G SAMUELSEN, F HOLCOMB, J KING, Accurate simplified dynamic model of a metal hydride tank International Journal of Hydrogen Energy. ,vol. 33, pp. 5596- 5605 ,(2008) , 10.1016/J.IJHYDENE.2008.05.104