High-Temperature Tensile Strength of Al 10 Co 25 Cr 8 Fe 15 Ni 36 Ti 6 Compositionally Complex Alloy (High-Entropy Alloy)
作者： H. M. Daoud , A. M. Manzoni , N. Wanderka , U. Glatzel
DOI: 10.1007/S11837-015-1484-7
关键词:
摘要: Homogenizing at 1220°C for 20 h and subsequent aging 900°C 5 50 of a novel Al10Co25Cr8Fe15Ni36Ti6 compositionally complex alloy (high-entropy alloy) produces microstructure consisting an L12 ordered γ′ phase embedded in face-centered cubic solid-solution γ matrix together with needle-like B2 precipitates (NiAl). The volume fraction is ~46% <5%, which accordance the prediction calculation diagram method (CALPHAD using Thermo-Calc software TTNi7 database; Software, Stockholm, Sweden). high-temperature tensile tests were carried out room temperature, 600°C, 700°C, 800°C, 1000°C. strength as well elongation to failure both heat-treated specimens very high all tested temperatures. values has been compared literature data well-known Alloy 800H Inconel 617, discussed terms observed microstructure.
springer.com
uni-bayreuth.de
harvard.edu
core.ac.uk 参考文章(16)
O.N. Senkov, J.M. Scott, S.V. Senkova, D.B. Miracle, C.F. Woodward, Microstructure and Room Temperature Properties of a High-Entropy TaNbHfZrTi Alloy (Postprint) Journal of Alloys and Compounds. ,vol. 509, pp. 6043- 6048 ,(2011) , 10.1016/J.JALLCOM.2011.02.171
H. M. Daoud, A. Manzoni, R. Völkl, N. Wanderka, U. Glatzel, Microstructure and Tensile Behavior of Al 8 Co 17 Cr 17 Cu 8 Fe 17 Ni 33 (at.%) High-Entropy Alloy JOM. ,vol. 65, pp. 1805- 1814 ,(2013) , 10.1007/S11837-013-0756-3
Yong Zhang, Ting Ting Zuo, Zhi Tang, Michael C Gao, Karin A Dahmen, Peter K Liaw, Zhao Ping Lu, None, Microstructures and properties of high-entropy alloys Progress in Materials Science. ,vol. 61, pp. 1- 93 ,(2014) , 10.1016/J.PMATSCI.2013.10.001
Chung-Jin Tong, Yu-Liang Chen, Jien-Wei Yeh, Su-Jien Lin, Swe-Kai Chen, Tao-Tsung Shun, Chun-Huei Tsau, Shou-Yi Chang, Microstructure characterization of Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 36, pp. 881- 893 ,(2005) , 10.1007/S11661-005-0283-0
A. Sengupta, S. K. Putatunda, L. Bartosiewicz, J. Hangas, P. J. Nailos, M. Peputapeck, F. E. Alberts, Tensile behavior of a new single-crystal nickel-based superalloy (CMSX-4) at room and elevated temperatures Journal of Materials Engineering and Performance. ,vol. 3, pp. 664- 672 ,(1994) , 10.1007/BF02654502
O.N. Senkov, G.B. Wilks, J.M. Scott, D.B. Miracle, Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys Intermetallics. ,vol. 19, pp. 698- 706 ,(2011) , 10.1016/J.INTERMET.2011.01.004
J.-W. Yeh, S.-K. Chen, S.-J. Lin, J.-Y. Gan, T.-S. Chin, T.-T. Shun, C.-H. Tsau, S.-Y. Chang, Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes Advanced Engineering Materials. ,vol. 6, pp. 299- 303 ,(2004) , 10.1002/ADEM.200300567
Jien Wei Yeh, Yu Liang Chen, Su Jien Lin, Swe Kai Chen, High-Entropy Alloys – A New Era of Exploitation Materials Science Forum. ,vol. 560, pp. 1- 9 ,(2007) , 10.4028/WWW.SCIENTIFIC.NET/MSF.560.1
F. Otto, A. Dlouhý, Ch. Somsen, H. Bei, G. Eggeler, E.P. George, The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy Acta Materialia. ,vol. 61, pp. 5743- 5755 ,(2013) , 10.1016/J.ACTAMAT.2013.06.018
K.B. Zhang, Z.Y. Fu, J.Y. Zhang, W.M. Wang, H. Wang, Y.C. Wang, Q.J. Zhang, J. Shi, Microstructure and mechanical properties of CoCrFeNiTiAlx high-entropy alloys Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 508, pp. 214- 219 ,(2009) , 10.1016/J.MSEA.2008.12.053