The Effects of Sealing Treatment and Wood Species on Formaldehyde Emission of Plywood
作者： Wubin Ding , Wenyan Li , Qiang Gao , Chunrui Han , Shifeng Zhang
DOI: 10.15376/BIORES.8.2.2568-2582
关键词:
摘要: Urea-formaldehyde (UF) resin (F/U: 1.25), melamine-urea-formaldehyde (MUF) (F/(U+M): 1.05), and three kinds of wood species including poplar (Populus davidiana Dode), beech (Fagus engleriana Seem.), eucalyptus (Eucalyptus robusta Smith) were used to produce plywood. The effects sealing treatment on the formaldehyde emissions studied. anatomical characteristics different measured. results showed that: (1) emission plywood treated by surface was higher than without treatment; (2) nine-ply bonded UF decreased 74.4% 1.98 mg/L after edge (3) compared with plywood, five-ply MUF lowest obtained, at 0.19 mg/L; (4) from changed slightly in spite layers. contact angle spreading-penetration coefficient, K, analyses that cell arrangement dense. Scanning electron micrographs indicated pore sizes samples smallest contrast beech.
sci-hub.se 参考文章(9)
Junwen Pu, Guofeng Wu, Shuping Song, Hao Zhang, Jing Zhang, MODIFIED NANOCRYSTALLINE CELLULOSE FROM TWO KINDS OF MODIFIERS USED FOR IMPROVING FORMALDEHYDE EMISSION AND BONDING STRENGTH OF UREA-FORMALDEHYDE RESIN ADHESIVE Bioresources. ,vol. 6, pp. 4430- 4438 ,(2011)
Qiang Gao, Sheldon Q Shi, Shifeng Zhang, Jianzhang Li, Xiaomei Wang, Wubin Ding, Kaiwen Liang, Jinwu Wang, None, Soybean meal-based adhesive enhanced by MUF resin Journal of Applied Polymer Science. ,vol. 125, pp. 3676- 3681 ,(2012) , 10.1002/APP.36700
Kaichang Li, Svetlana Peshkova, Xinglian Geng, Investigation of soy protein-kymene ® adhesive systems for wood composites Journal of the American Oil Chemists' Society. ,vol. 81, pp. 487- 491 ,(2004) , 10.1007/S11746-004-0928-1
M. Schäfer, E. Roffael, On the formaldehyde release of wood European Journal of Wood and Wood Products. ,vol. 58, pp. 259- 264 ,(2000) , 10.1007/S001070050422
Shuangying Wei, Junyou Shi, Jiyou Gu, Di Wang, Yanhua Zhang, Dynamic wettability of wood surface modified by acidic dyestuff and fixing agent Applied Surface Science. ,vol. 258, pp. 1995- 1999 ,(2012) , 10.1016/J.APSUSC.2011.05.072
Byung-Dae Park, Jae-Woo Kim, Dynamic mechanical analysis of urea–formaldehyde resin adhesives with different formaldehyde-to-urea molar ratios Journal of Applied Polymer Science. ,vol. 108, pp. 2045- 2051 ,(2008) , 10.1002/APP.27595
Martin Böhm, Mohamed Z.M. Salem, Jaromír Srba, Formaldehyde emission monitoring from a variety of solid wood, plywood, blockboard and flooring products manufactured for building and furnishing materials. Journal of Hazardous Materials. ,vol. 221, pp. 68- 79 ,(2012) , 10.1016/J.JHAZMAT.2012.04.013
Jae-Yoon An, Sumin Kim, Hyun-Joong Kim, Janghoo Seo, Emission behavior of formaldehyde and TVOC from engineered flooring in under heating and air circulation systems Building and Environment. ,vol. 45, pp. 1826- 1833 ,(2010) , 10.1016/J.BUILDENV.2010.02.012
Douglas J. Gardner, Sheldon Q. Shi, Dynamic adhesive wettability of wood Wood and Fiber Science. ,vol. 33, pp. 58- 68 ,(2001)