Weld line characteristics of PC/ABS blend. II. Effect of reactive compatibilizer
作者： Jong Cheol Lim , Kuk Young Cho , Jung-Ki Park
DOI: 10.1002/APP.27316
关键词:
摘要: The effects of reactive compatibilizer and processing temperature on the morphology mechanical properties at weld line 60/40 (wt/wt) poly- carbonate (PC) acrylonitrile-butadiene-styrene (ABS) copolymer blends were investigated. Amine functionalized styrene/n-phenyl maleimide/maleic anhydride terpolymer (amine-SPMIMA) was used as in-situ for PC/ABS blend. Weld tensile strength increased content amine-SPMIMA increased. impact showed maximum value blend containing about 3% amine-SPMIMA. variation in property correlated with change © 2008 Wiley Periodicals, Inc. J Appl Polym Sci,
sci-hub.se 参考文章(44)
G Wildes, H Keskkula, D.R Paul, Coalescence in PC/SAN blends : effect of reactive compatibilization and matrix phase viscosity Polymer. ,vol. 40, pp. 5609- 5621 ,(1999) , 10.1016/S0032-3861(98)00776-9
S. C. Malguarnera, A. Manisali, The effects of processing parameters on the tensile properties of weld lines in injection molded thermoplastics Polymer Engineering and Science. ,vol. 21, pp. 586- 593 ,(1981) , 10.1002/PEN.760211004
G. Titomanlio, S. Piccarolo, A. Rallis, Knit lines structure in injection molding of nylon 6: relation to first solidified sample cross section Polymer Engineering and Science. ,vol. 29, pp. 209- 213 ,(1989) , 10.1002/PEN.760290402
S. Fellahi, A. Meddad, B. Fisa, B. D. Favis, Weldlines in injection‐molded parts: A review Advances in Polymer Technology. ,vol. 14, pp. 169- 195 ,(1995) , 10.1002/ADV.1995.060140302
Salvatore C. Malguarnera, Weld Lines in Polymer Processing Polymer-plastics Technology and Engineering. ,vol. 18, pp. 1- 45 ,(1982) , 10.1080/03602558208067709
S. Fellahi, B.D. Favis, B. Fisa, Morphological stability in injection-moulded high-density polyethylene/polyamide-6 blends Polymer. ,vol. 37, pp. 2615- 2626 ,(1996) , 10.1016/0032-3861(96)87620-8
D. Debier, J. Devaux, R. Legras, D. Leblanc, Influence of a core/shell rubber phase on the morphology and the impact resistance of a PC/SAN blend (75/25) Polymer Engineering and Science. ,vol. 34, pp. 613- 624 ,(1994) , 10.1002/PEN.760340802
S.C. Tjong, Y.Z. Meng, Effect of reactive compatibilizers on the mechanical properties of polycarbonate/poly(acrylonitrile-butadiene-styrene) blends European Polymer Journal. ,vol. 36, pp. 123- 129 ,(2000) , 10.1016/S0014-3057(99)00044-0
S. Balakrishnan, N. R. Neelakantan, S. N. Jaisankar, Effect of functionality levels and compatibility of polycarbonate blends with maleic anhydride grafted ABS Journal of Applied Polymer Science. ,vol. 74, pp. 2102- 2110 ,(1999) , 10.1002/(SICI)1097-4628(19991121)74:8<2102::AID-APP27>3.0.CO;2-Y
S. Fellahi, B. Fisa, B. D. Favis, Weldline strength in injection molded HDPE/PA6 blends: Influence of interfacial modification Journal of Applied Polymer Science. ,vol. 57, pp. 1319- 1332 ,(1995) , 10.1002/APP.1995.070571109