Characterization of interfacial behaviour in carbon-fibre/cyanate composites
作者： C Marieta , E Schulz , I Mondragon
DOI: 10.1016/S0266-3538(01)00215-9
关键词:
摘要: In this study an attempt is made to investigate the influence of surface treatments such as oxidation and sizing on a high-strength carbon fibre in respect interfacial adhesion composite materials with cyanate matrix. For analysing fibre/resin single-fibre pull-out technique has been used. The shear strengths obtained by have compared results interlaminar strength measurements corresponding woven plates. order clarify nature adhesion, both morphological (by atomic force microscopy, AFM) chemical characterisation Fourier transform infrared, FTIR), also carried out.
elsevier.com
sci-hub.se 参考文章(19)
Leighton H. Peebles, Carbon Fibers: Formation, Structure, and Properties ,(2017)
M.D Martin, M Ormaetxea, I Harismendy, P.M Remiro, I Mondragon, Cure chemo-rheology of mixtures based on epoxy resins and ester cyanates European Polymer Journal. ,vol. 35, pp. 57- 68 ,(1999) , 10.1016/S0014-3057(98)00095-0
E. Mäder, Study of fibre surface treatments for control of interphase properties in composites Composites Science and Technology. ,vol. 57, pp. 1077- 1088 ,(1997) , 10.1016/S0266-3538(97)00002-X
F. Hoecker, J. Karger-Kocsis, Effects of the interface on the mechanical response of CF/EP microcomposites and macrocomposites Composites. ,vol. 25, pp. 729- 738 ,(1994) , 10.1016/0010-4361(94)90208-9
C Ageorges, K Friedrich, L Ye, Experiments to relate carbon-fibre surface treatments to composite mechanical properties Composites Science and Technology. ,vol. 59, pp. 2101- 2113 ,(1999) , 10.1016/S0266-3538(99)00067-6
D. Upadhyaya, P. Tsakiropoulos, Evaluation of the effect of sizing levels on transverse flexural and shear strengths of carbon/epoxy composites Journal of Materials Processing Technology. ,vol. 54, pp. 17- 20 ,(1995) , 10.1016/0924-0136(95)01912-X
Shiqiang Deng, Lin Ye, Yiu-Wing Mai, Measurement of interfacial shear strength of carbon fibre/epoxy composites using a single fibre pull-out test Advanced Composite Materials. ,vol. 7, pp. 169- 182 ,(1998) , 10.1163/156855198X00129
M.R. Piggott, Why interface testing by single-fibre methods can be misleading Composites Science and Technology. ,vol. 57, pp. 965- 974 ,(1997) , 10.1016/S0266-3538(97)00036-5
Akihiko Fukunaga, Shigetomo Ueda, Anodic surface oxidation for pitch-based carbon fibers and the interfacial bond strengths in epoxy matrices Composites Science and Technology. ,vol. 60, pp. 249- 254 ,(2000) , 10.1016/S0266-3538(99)00118-9
Colette Cazeneuve, James E. Castle, John F. Watts, The structure of the interface in carbon fibre composites by scanning Auger microscopy Journal of Materials Science. ,vol. 25, pp. 1902- 1908 ,(1990) , 10.1007/BF01045740