Dissimilar Friction-Stir Lap Joining of 5083 Aluminum Alloy to CuZn34 Brass
作者： Mostafa Akbari , Reza Abdi Behnagh
DOI: 10.1007/S11663-012-9682-Y
关键词:
摘要: In this research, lap joining of Al-Mg aluminum alloy and CuZn34 brass was produced by friction-stir welding during which the sheet placed on CuZn34. Optical microscopy, scanning electron microscopy (SEM), X-ray diffraction analysis, energy-dispersive spectroscopy (EDS) analysis were used to probe microstructures chemical compositions. addition, mechanical properties each sample are characterized using both shear hardness tests. The optimum parameters resulted in no visible cracks defects. A dark area Al/CuZn34 interface contained intermetallic compounds Al2Cu, Al4Cu9, CuZn. results show that high rotational speeds or low traverse causes growth interfacial area.
springer.com
harvard.edu
sci-hub.se 参考文章(21)
Ying Li, E. A. Trillo, L. E. Murr, Friction-stir welding of aluminum alloy 2024 to silver Journal of Materials Science Letters. ,vol. 19, pp. 1047- 1051 ,(2000) , 10.1023/A:1006795221194
David G. Rethwisch, William D. Callister, Fundamentals of Materials Science and Engineering ,(2000)
Ahmed ELREFAEY, Makoto TAKAHASHI, Kenji IKEUCHI, Microstructure of Aluminum/Copper Lap Joint by Friction Stir Welding and Its Performance Journal of High Temperature Society. ,vol. 30, pp. 286- 292 ,(2004) , 10.7791/JHTS.30.286
A. Abdollah-Zadeh, T. Saeid, B. Sazgari, Microstructural and mechanical properties of friction stir welded aluminum/copper lap joints Journal of Alloys and Compounds. ,vol. 460, pp. 535- 538 ,(2008) , 10.1016/J.JALLCOM.2007.06.009
S Hirano, K Okamoto, M Doi, O Kamura, M Inagaki, Y Aono, Microstructure of the interface in magnesium alloy to aluminium alloy dissimilar joints produced by friction stir welding Welding International. ,vol. 18, pp. 702- 708 ,(2004) , 10.1533/WINT.2004.3319
P. Cavaliere, A. De Santis, F. Panella, A. Squillace, Effect of welding parameters on mechanical and microstructural properties of dissimilar AA6082–AA2024 joints produced by friction stir welding Materials & Design. ,vol. 30, pp. 609- 616 ,(2009) , 10.1016/J.MATDES.2008.05.044
Y.C. Chen, K. Nakata, Friction stir lap joining aluminum and magnesium alloys Scripta Materialia. ,vol. 58, pp. 433- 436 ,(2008) , 10.1016/J.SCRIPTAMAT.2007.10.033
G. Minak, L. Ceschini, I. Boromei, M. Ponte, Fatigue properties of friction stir welded particulate reinforced aluminium matrix composites International Journal of Fatigue. ,vol. 32, pp. 218- 226 ,(2010) , 10.1016/J.IJFATIGUE.2009.02.018
A. Esmaeili, M.K. Besharati Givi, H.R. Zareie Rajani, A metallurgical and mechanical study on dissimilar Friction Stir welding of aluminum 1050 to brass (CuZn30) Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 528, pp. 7093- 7102 ,(2011) , 10.1016/J.MSEA.2011.06.004
C. Genevois, M. Girard, B. Huneau, X. Sauvage, G. Racineux, Interfacial Reaction during Friction Stir Welding of Al and Cu Metallurgical and Materials Transactions A. ,vol. 42, pp. 2290- 2295 ,(2011) , 10.1007/S11661-011-0660-9