Comparison of the externally heated air valve engine and the helium Stirling engine
作者： Zbyszko Kazimierski , Jerzy Wojewoda
DOI: 10.1016/J.ENCONMAN.2013.12.055
关键词:
摘要: Abstract A two-stroke, externally heated valve engine (EHVE) with a heater, cooler and two blowers is simulated. The entirely different from typical Stirling engine. pressure ratio p max / min of its cycle higher, but the volume mean value heat exchanger wall temperatures are same. power efficiency EHVE engines under same maximum pressures compared. results show that reaches almost level performance as engine, while using only available atmospheric air, rather than helium.
elsevier.com
sci-hub.se 参考文章(32)
Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah, None, Optimization of Stirling engine performance based on an experimental design approach International Journal of Energy Research. ,vol. 37, pp. 1519- 1528 ,(2013) , 10.1002/ER.2964
L. Raggi, M. Katsuta, N. Isshiki, S. Isshiki, Theoretical and experimental study on regenerative rotary displacer Stirling engine intersociety energy conversion engineering conference. pp. 1017- 1022 ,(1997) , 10.1109/IECEC.1997.661908
R.W. Moss, A.P. Roskilly, S.K. Nanda, Reciprocating Joule-cycle engine for domestic CHP systems Applied Energy. ,vol. 80, pp. 169- 185 ,(2005) , 10.1016/J.APENERGY.2004.03.007
L SCOLLO, P VALDEZ, J BARON, Design and construction of a Stirling engine prototype International Journal of Hydrogen Energy. ,vol. 33, pp. 3506- 3510 ,(2008) , 10.1016/J.IJHYDENE.2007.12.069
İhsan Batmaz, Süleyman Üstün, Design and manufacturing of a V-type Stirling engine with double heaters Applied Energy. ,vol. 85, pp. 1041- 1049 ,(2008) , 10.1016/J.APENERGY.2008.02.021
Iskander Tlili, Sa’ed A. Musmar, Thermodynamic evaluation of a second order simulation for Yoke Ross Stirling engine Energy Conversion and Management. ,vol. 68, pp. 149- 160 ,(2013) , 10.1016/J.ENCONMAN.2013.01.005
H. Karabulut, C. Çınar, E. Oztürk, H.S. Yücesu, Torque and power characteristics of a helium charged Stirling engine with a lever controlled displacer driving mechanism Renewable Energy. ,vol. 35, pp. 138- 143 ,(2010) , 10.1016/J.RENENE.2009.04.023
Angkee Sripakagorn, Chana Srikam, Design and performance of a moderate temperature difference Stirling engine Renewable Energy. ,vol. 36, pp. 1728- 1733 ,(2011) , 10.1016/J.RENENE.2010.12.010
C. Walther, H. -D. Kühl, S. Schulz, Numerical investigations on the heat transfer in turbulent oscillating pipe flow Heat and Mass Transfer. ,vol. 36, pp. 135- 141 ,(2000) , 10.1007/S002310050375
D.G. Thombare, S.K. Verma, TECHNOLOGICAL DEVELOPMENT IN THE STIRLING CYCLE ENGINES Renewable & Sustainable Energy Reviews. ,vol. 12, pp. 1- 38 ,(2008) , 10.1016/J.RSER.2006.07.001