Development of a 3D printer–scanner hybrid from e-waste
作者： M. Goswami , A. Kumar , R. Sadasivam , K. Kumari
DOI: 10.1007/S13762-021-03131-6
关键词:
摘要: Once the operational life of electronics component is over, it becomes part electronic waste (e-waste). Afterwards, either dumped in landfills or recycled for metallic constituents. Landfills, long run, are proven hazardous. Recycling approach also leaves a significant energy footprint on environment. This article presents brief insight into harmful impacts e-waste. Primary aim this work to justify importance adjusting new technology according conventional one so that working components from obsolete can be utilized optimally. Prototype compact 3D printer and scanner combo presented here, as solution. The main system, namely stepper motors, power supply, supporting structure, salvaged Interfacing control codes (novel aspects work) developed automation. Performance compared with commercial printer. found suitable (even performing at par) samples (wall thickness $$0.1mm$$ ). inter-convertibility act will become necessary when technologies like 5G, electric vehicle take over existing leaving e-waste dispose. It expected philosophy, if integrated industrial level by encouraging protocols product development manpower training, would reduce burden
springer.com
sci-hub.st 参考文章(53)
Zhengmao Zhu, Kayvan Abbassian, Jongwon Kim, H-bridge drive circuit for step motor control ,(2010)
Sunyoung Kim, Eric Paulos, Practices in the creative reuse of e-waste Proceedings of the 2011 annual conference on Human factors in computing systems - CHI '11. pp. 2395- 2404 ,(2011) , 10.1145/1978942.1979292
Nguyen Ngoc Ha, Tetsuro Agusa, Karri Ramu, Nguyen Phuc Cam Tu, Satoko Murata, Keshav A. Bulbule, Peethmbaram Parthasaraty, Shin Takahashi, Annamalai Subramanian, Shinsuke Tanabe, Contamination by trace elements at e-waste recycling sites in Bangalore, India. Chemosphere. ,vol. 76, pp. 9- 15 ,(2009) , 10.1016/J.CHEMOSPHERE.2009.02.056
Qihang Wu, Jonathan Y.S. Leung, Xinhua Geng, Shejun Chen, Xuexia Huang, Haiyan Li, Zhuying Huang, Libin Zhu, Jiahao Chen, Yayin Lu, Heavy metal contamination of soil and water in the vicinity of an abandoned e-waste recycling site: implications for dissemination of heavy metals. Science of The Total Environment. ,vol. 506, pp. 217- 225 ,(2015) , 10.1016/J.SCITOTENV.2014.10.121
F.O. Ongondo, I.D. Williams, T.J. Cherrett, How are WEEE doing? A global review of the management of electrical and electronic wastes Waste Management. ,vol. 31, pp. 714- 730 ,(2011) , 10.1016/J.WASMAN.2010.10.023
S. Northey, N. Haque, G. Mudd, Using sustainability reporting to assess the environmental footprint of copper mining Journal of Cleaner Production. ,vol. 40, pp. 118- 128 ,(2013) , 10.1016/J.JCLEPRO.2012.09.027
Andriy Fedorov, Reinhard Beichel, Jayashree Kalpathy-Cramer, Julien Finet, Jean-Christophe Fillion-Robin, Sonia Pujol, Christian Bauer, Dominique Jennings, Fiona Fennessy, Milan Sonka, John Buatti, Stephen Aylward, James V. Miller, Steve Pieper, Ron Kikinis, 3D Slicer as an image computing platform for the Quantitative Imaging Network. Magnetic Resonance Imaging. ,vol. 30, pp. 1323- 1341 ,(2012) , 10.1016/J.MRI.2012.05.001
Anneli Julander, Lennart Lundgren, Lizbet Skare, Margaretha Grandér, Brita Palm, Marie Vahter, Carola Lidén, Formal recycling of e-waste leads to increased exposure to toxic metals: an occupational exposure study from Sweden. Environment International. ,vol. 73, pp. 243- 251 ,(2014) , 10.1016/J.ENVINT.2014.07.006
Athanasios Anastasiou, Charalambos Tsirmpas, Alexandros Rompas, Kostas Giokas, Dimitris Koutsouris, 3D printing: Basic concepts mathematics and technologies bioinformatics and bioengineering. pp. 1- 4 ,(2013) , 10.1109/BIBE.2013.6701672
Stanislaw Dudka, Domy C. Adriano, Environmental Impacts of Metal Ore Mining and Processing: A Review Journal of Environmental Quality. ,vol. 26, pp. 590- 602 ,(1997) , 10.2134/JEQ1997.00472425002600030003X