Improved Radial Plane Fins Heat Sink for Light-Emitting Diode Lamps Cooling
作者： António MG Lopes , Vítor AF Costa , None
DOI: 10.1115/1.4045695
关键词:
摘要: A numerical study is conducted concerning the improvement of radial plane fins heat sinks for natural convection cooling of light-emitting diode (LED) lamps. The main objective is to maintain the temperature of the heat sink base below a prescribed threshold for a given released heat flux at the heat sink, minimizing its mass and maintaining at a reasonably simple level the manufacturing processes and operations required for its production. Starting from a previously optimized heat sink for the same purpose, constituted by complete rectangular radial plane fins, the present study aims at further improvements by considering incomplete rectangular radial plane fins. The main objective of this study is to find the best profile for the turning operation to obtain the radial plane fins lighter configuration. It is found that this can be achieved by removing part of the upper internal corners of the rectangular fins, more specifically shaping a curved cut, leading to heat sink mass reduction up to 32.4%. The geometry of the improved heat sink is of cylindrical nature, obtained from cutting an aluminum extruded bar comprising a cylindrical central core and a number of uniformly distributed rectangular radial plane fins, followed by a simple turning operation to remove their upper internal corners. Even if results concern a particular LED lamp, the main ideas and approach prevail to improve other types of heat sinks for general light and/or electronic components cooling.
asme.org
sci-hub.st 参考文章(27)
Seung-Jae Park, Daeseok Jang, Kwan-Soo Lee, Thermal performance improvement of a radial heat sink with a hollow cylinder for LED downlight applications International Journal of Heat and Mass Transfer. ,vol. 89, pp. 1184- 1189 ,(2015) , 10.1016/J.IJHEATMASSTRANSFER.2015.06.037
Bin Li, Chan Byon, Experimental and numerical study on the heat sink with radial fins and a concentric ring subject to natural convection Applied Thermal Engineering. ,vol. 90, pp. 345- 351 ,(2015) , 10.1016/J.APPLTHERMALENG.2015.06.083
Min Woo Jeong, Seung Won Jeon, Yongchan Kim, Optimal thermal design of a horizontal fin heat sink with a modified-opening model mounted on an LED module Applied Thermal Engineering. ,vol. 91, pp. 105- 115 ,(2015) , 10.1016/J.APPLTHERMALENG.2015.08.001
Aníbal De Almeida, Bruno Santos, Bertoldi Paolo, Michel Quicheron, Solid state lighting review – Potential and challenges in Europe Renewable & Sustainable Energy Reviews. ,vol. 34, pp. 30- 48 ,(2014) , 10.1016/J.RSER.2014.02.029
Vítor AF Costa, António MG Lopes, None, Improved radial heat sink for led lamp cooling Applied Thermal Engineering. ,vol. 70, pp. 131- 138 ,(2014) , 10.1016/J.APPLTHERMALENG.2014.04.068
Seung-Jae Park, Daeseok Jang, Se-Jin Yook, Kwan-Soo Lee, Optimization of a staggered pin-fin for a radial heat sink under free convection International Journal of Heat and Mass Transfer. ,vol. 87, pp. 184- 188 ,(2015) , 10.1016/J.IJHEATMASSTRANSFER.2015.03.089
E. M. Sparrow, R. D. Cess, Ernst Schmidt, Radiation Heat Transfer ,(1978)
Bin Li, Young-Jin Baik, Chan Byon, Enhanced natural convection heat transfer of a chimney-based radial heat sink Energy Conversion and Management. ,vol. 108, pp. 422- 428 ,(2016) , 10.1016/J.ENCONMAN.2015.11.037
Seung-Jae Park, Daeseok Jang, Se-Jin Yook, Kwan-Soo Lee, Optimization of a chimney design for cooling efficiency of a radial heat sink in a LED downlight Energy Conversion and Management. ,vol. 114, pp. 180- 187 ,(2016) , 10.1016/J.ENCONMAN.2016.02.024
Dong Ho Park, Dong Beom Lee, Eung Ryeol Seo, Yong Jong Park, A parametric study on heat dissipation from a LED-lamp Applied Thermal Engineering. ,vol. 108, pp. 1261- 1267 ,(2016) , 10.1016/J.APPLTHERMALENG.2016.08.032