An experimental investigation of the bearing strength of weft-knitted 1×1 rib glass fiber composites
作者： Mevlüt Tercan , Osman Asi , Alaattin Aktaş
DOI: 10.1016/J.COMPSTRUCT.2005.10.015
关键词:
摘要: Abstract An experimental study has been carried out to investigate the bearing strength of a weft-knitted 1 × 1 rib glass-fiber composite plate pinned-joint in three directions: 0°, 45° and 90°. The knitted fabrics used for are manufactured from 200 tex glass yarn with epoxy resin cured hot press machine. experiments were according ASTM D953 standard [1] . ratio edge distance pin diameter ( E / d ), specimen width W ) systematically varied during experiments. results show that values obtained wale directions stronger than course directions. Additionally, each direction reaches their upper limit strengths when ratios equal or greater 4. fabric material gives nearly isotropic feature.
elsevier.com
sci-hub.se 参考文章(10)
Alaattin Aktaş, Bearing strength of carbon epoxy laminates under static and dynamic loading Composite Structures. ,vol. 67, pp. 485- 489 ,(2005) , 10.1016/J.COMPSTRUCT.2004.02.007
B. Gommers, I. Verpoest, P. Van Houtte, Analysis of knitted fabric reinforced composites: Part I. Fibre orientation distribution Composites Part A-applied Science and Manufacturing. ,vol. 29, pp. 1579- 1588 ,(1998) , 10.1016/S1359-835X(98)00095-5
S. Ramakrishna, CHARACTERIZATION AND MODELING OF THE TENSILE PROPERTIES OF PLAIN WEFT-KNIT FABRIC-REINFORCED COMPOSITES Composites Science and Technology. ,vol. 57, pp. 1- 22 ,(1997) , 10.1016/S0266-3538(96)00098-X
P Xue, T.X Yu, X.M Tao, Tensile properties and meso-scale mechanism of weft knitted textile composites for energy absorption Composites Part A: Applied Science and Manufacturing. ,vol. 33, pp. 113- 123 ,(2002) , 10.1016/S1359-835X(01)00067-7
Alaattin Aktas, M. Husnu Dirikolu, An experimental and numerical investigation of strength characteristics of carbon-epoxy pinned-joint plates Composites Science and Technology. ,vol. 64, pp. 1605- 1611 ,(2004) , 10.1016/J.COMPSCITECH.2003.11.005
Y Luo, I Verpoest, Biaxial tension and ultimate deformation of knitted fabric reinforcements Composites Part A-applied Science and Manufacturing. ,vol. 33, pp. 197- 203 ,(2002) , 10.1016/S1359-835X(01)00106-3
K.H. Leong, P.J. Falzon, M.K. Bannister, I. Herszberg, An investigation of the mechanical performance of weft-knit milano-rib glass/epoxy composites Composites Science and Technology. ,vol. 58, pp. 239- 251 ,(1998) , 10.1016/S0266-3538(97)00128-0
D Falconnet, P-E Bourban, Surya Pandita, J-AE Månson, Ignace Verpoest, Fracture toughness of weft-knitted fabric composites Composites Part B-engineering. ,vol. 33, pp. 579- 588 ,(2002) , 10.1016/S1359-8368(02)00053-7
Alaattin Aktas, Ramazan Karakuzu, Failure Analysis of Two-Dimensional Carbon-Epoxy Composite Plate Pinned Joint Mechanics of Composite Materials and Structures. ,vol. 6, pp. 347- 361 ,(1999) , 10.1080/107594199305502
B Gommers, Jan Ivens, Surya Pandita, G Huysmans, Ignace Verpoest, D Philips, Yiwen Luo, The potential of knitted fabrics as a reinforcement for composites Proc. ICCM-11, 11th International Conference on Composite Materials. ,vol. 1, pp. 108- 133 ,(1997)