Multi-contact connector
作者： Stephane Moyon , Bernard Van Den Meersschaut , Marnix Van Der Mee
DOI:
关键词:
摘要: A multi-contact connector may include: a case body including cable-attachment portion configured to enable cables be attached the portion, preferably using an attachment piece that is distinct from body, for example, conductive or insulating collar. The project rear of and includes cross-section substantially U-shaped. Electrical contact elements mounted in connector, being connected cables, wherein are secured by clamping fitting such as deprived shielding cap.
lens.org 参考文章(54)
Paul Huska, Clamping screw device ,(1990)
H Woertz, Screwless electrical quick connection terminal ,(1972)
Allen J. Bernardini, Connector backshell for use with flexible conduit with an internal strain relief clamp ,(1992)
Michael Fasano, Circuit breaker plug in bracket and auxiliary/alarm switch connector for use therewith ,(1999)
Heather Pugliese, James R. Scanlon, Three phase sub feed lug accessory ,(1999)
Heung-Sik Yoon, Wire connection with exchangeable securing member for electric connection terminal assembly ,(1998)
Paul A. Johnston, Connector accessory for shield termination ,(1994)
Arthur J. Felber, Jeffrey A. Moranski, Ronald J. Malecki, Mark E. Davidsz, Terminal block segment with feet for mounting on tracks of two different widths ,(1992)
Clair W. Snyder, John C. Asick, John M. Landis, Shielded cable on coaxial connector ,(1982)
Chuong H. Diep, Miniature, shielded electrical connector with strain relief ,(2003)