Influence of counter material on friction and wear performance of PTFE–metal binary coatings
作者： Masaaki Yamane , Tadeusz A. Stolarski , Shogo Tobe
DOI: 10.1016/J.TRIBOINT.2007.07.008
关键词:
摘要: The study presented in this paper concerns the influence of counter materials on wear and friction performance polytetrafluoroethylene (PTFE) reservoirs arranged distinct patterns coated surfaces. Al-bronze Mo coatings were deposited a mild steel substrate using an atmospheric plasma spray process. Three PTFE used. Pins, which served as surface, made three different materials. Wear tests carried out pin-on-disc test rig at room temperature under dry contact conditions. constant pressure 10 MPa. An average linear speed disc was 0.036 m/s. importance appropriately matched hardness two surfaces sliding is emphasised. Due to inadequate material, coating adversely affected expected beneficial action severely hindered. proved be performing far better than coating. Serious deterioration occurred faster that for
elsevier.com
sci-hub.se 参考文章(24)
KYUICHIRO TANAKA, Chapter 5 - Effects of Various Fillers on the Friction and Wear of PTFE-Based Composites Composite Materials Series. ,vol. 1, pp. 137- 174 ,(1986) , 10.1016/B978-0-444-42524-9.50009-0
Gong Deli, Xue Qunji, Wang Hongli, ESCA study on tribochemical characteristics of filled PTFE Wear. ,vol. 148, pp. 161- 169 ,(1991) , 10.1016/0043-1648(91)90214-F
J. Bijwe, S. Neje, J. Indumathi, M. Fahim, Friction and Wear Performance Evaluation of Carbon Fibre Reinforced PTFE Composite Journal of Reinforced Plastics and Composites. ,vol. 21, pp. 1221- 1240 ,(2002) , 10.1177/073168402128987743
S.N. Kukureka, Y.K. Chen, C.J. Hooke, P. Liao, The wear mechanisms of acetal in unlubricated rolling-sliding contact Wear. ,vol. 185, pp. 1- 8 ,(1995) , 10.1016/0043-1648(94)06575-6
Zhiqiang Liu, Meng Hua, Wear transitions and mechanisms in lubricated sliding of a molybdenum coating Tribology International. ,vol. 32, pp. 499- 506 ,(1999) , 10.1016/S0301-679X(99)00079-1
Shahzad Alam, R.I. Marshall, Shinya Sasaki, Metallurgical and tribological investigations of aluminium bronze bushes made by a novel centrifugal casting technique Tribology International. ,vol. 29, pp. 487- 492 ,(1996) , 10.1016/0301-679X(95)00108-G
J.A. Horwath, Molybdenum spray coating of transmission synchronizer rings Thin Solid Films. ,vol. 73, pp. 79- ,(1980) , 10.1016/0040-6090(80)90330-2
C.C. Lawrence, T.A. Stolarski, Rolling contact wear of polymers: A preliminary study Wear. ,vol. 132, pp. 183- 191 ,(1989) , 10.1016/0043-1648(89)90211-1
Friction and molecular structure: the behaviour of some thermoplastics Proceedings of The Royal Society A: Mathematical, Physical and Engineering Sciences. ,vol. 329, pp. 251- 274 ,(1972) , 10.1098/RSPA.1972.0112
S Alam, S Sasaki, H Shimura, Friction and wear characteristics of aluminum bronze coatings on steel substrates sprayed by a low pressure plasma technique Wear. ,vol. 248, pp. 75- 81 ,(2001) , 10.1016/S0043-1648(00)00520-2