Experimental Study on the Mechanical Properties of Biomass Briquettes from Different Agricultural Residues Combination
作者： H.C. Law , L.M. Gan , H.L. Gan
DOI: 10.1051/MATECCONF/201822504026
关键词:
摘要: Biomass has received tremendous attention as it is one of the best alternatives to replace use fossil fuels for energy generation. However, there are problems associated with utilization raw biomass which could be resolved through densification process. Besides, mixing between residues produce a quality briquette, at same time making good on residues. Rice husk, sugarcane bagasse and spent coffee ground were selected feedstocks briquettes formation. The ratios 100:0, 80:20, 60:40, 20:80, 40:60 0:100 used three different combinations. then compacted 300 bars 150°C 30 s. mechanical properties measured respects their shatter resistance, abrasive resistance well water resistance. effectively improved by compared pure materials. result showed that formed 40: 60 RH SB; 20: 80 SCG SB among optimum ratio respective combination fulfilling specifications strength durability.
sci-hub.se 参考文章(21)
Prabir Basu, Biomass Gasification and Pyrolysis: Practical Design and Theory ,(2010)
Zhengang Liu, Guanghua Han, Production of solid fuel biochar from waste biomass by low temperature pyrolysis Fuel. ,vol. 158, pp. 159- 165 ,(2015) , 10.1016/J.FUEL.2015.05.032
Herman Jacobus Cornelis Voorwald, Maria Odila H. Cioffi, Maria Lucia C. Pinto da Silva, Daniella Regina Mulinari, George J. Rocha, SURFACE MODIFICATION OF SUGARCANE BAGASSE CELLULOSE AND ITS EFFECT ON MECHANICAL AND WATER ABSORPTION PROPERTIES OF SUGARCANE BAGASSE CELLULOSE/ HDPE COMPOSITES Bioresources. ,vol. 5, pp. 661- 671 ,(2010)
Thanasit Wongsiriamnuay, Nakorn Tippayawong, Effect of densification parameters on the properties of maize residue pellets Biosystems Engineering. ,vol. 139, pp. 111- 120 ,(2015) , 10.1016/J.BIOSYSTEMSENG.2015.08.009
Biomass processing technologies Biomass processing technologies.. ,(2014) , 10.1201/B17093
S.A. Ndindeng, J.E.G. Mbassi, W.F. Mbacham, J. Manful, S. Graham-Acquaah, J. Moreira, J. Dossou, K. Futakuchi, Quality optimization in briquettes made from rice milling by-products Energy for Sustainable Development. ,vol. 29, pp. 24- 31 ,(2015) , 10.1016/J.ESD.2015.09.003
Jaya Shankar Tumuluru, Christopher T. Wright, J. Richard Hess, Kevin L. Kenney, A review of biomass densification systems to develop uniform feedstock commodities for bioenergy application. Biofuels, Bioproducts and Biorefining. ,vol. 5, pp. 683- 707 ,(2011) , 10.1002/BBB.324
Rukayya I. Muazu, Julia A. Stegemann, Effects of operating variables on durability of fuel briquettes from rice husks and corn cobs Fuel Processing Technology. ,vol. 133, pp. 137- 145 ,(2015) , 10.1016/J.FUPROC.2015.01.022
R. M. Davies, O. A. Davies, Physical and Combustion Characteristics of Briquettes Made from Water Hyacinth and Phytoplankton Scum as Binder Journal of Combustion. ,vol. 2013, pp. 1- 7 ,(2013) , 10.1155/2013/549894
Camila Rezende, Marisa de Lima, Priscila Maziero, Eduardo deAzevedo, Wanius Garcia, Igor Polikarpov, Chemical and morphological characterization of sugarcane bagasse submitted to a delignification process for enhanced enzymatic digestibility. Biotechnology for Biofuels. ,vol. 4, pp. 54- 54 ,(2011) , 10.1186/1754-6834-4-54