Mechanical Properties of Maize Stalk Nano-particle Reinforced Epoxy Composites
作者： Johnson Olumuyiwa Agunsoye , Adeola A Bamigbaiye , Sefiu Adekunle Bello , Suleiman Bolaji Hassan , None
DOI: 10.1007/S13369-020-04345-5
关键词:
摘要: This study addresses challenges of maize stalk wastes via conversion into nano-particles for producing epoxy composites at different levels reinforcements. Mechanical tests were conducted on the produced composites. The result obtained reveals that development polymer is synonymous with metallic crystal nucleation and growth. Epoxy have composite grains finer than those polymer. hardness value increased from 2.2 HV pristine to 10.35 17.83 HV 2 wt% UCMSnp CMSnp additions, respectively. improvement in values equal about 370 710%, respectively; likewise, tensile strengths. Better mechanical performance epoxy/carbonized nano-composites its counterpart containing uncarbonized attributed residual carbon carbonized known high strength.
springer.com
unilag.edu.ng参考文章(54)
Mohamad Akram, Iman Taha, Mohamed M. Ghobashy, Potential of carbon particle reinforced polypropylene formed in-situ through the pyrolysis of carboxymethylcellulose Composites Communications. ,vol. 1, pp. 6- 14 ,(2016) , 10.1016/J.COCO.2016.07.005
J.A. Adebisi, J.O. Agunsoye, S.A. Bello, I.I. Ahmed, O.A. Ojo, S.B. Hassan, Potential of producing solar grade silicon nanoparticles from selected agro-wastes: A review Solar Energy. ,vol. 142, pp. 68- 86 ,(2017) , 10.1016/J.SOLENER.2016.12.001
Jeleel Adekunle Adebisi, Johnson Olumuyiwa Agunsoye, Sefiu Adekunle Bello, Funsho O Kolawole, Mercy Munyadziwa Ramakokovhu, Michael Olawale Daramola, Suleiman Bolaji Hassan, None, Extraction of Silica from Sugarcane Bagasse, Cassava Periderm and Maize Stalk: Proximate Analysis and Physico-Chemical Properties of Wastes Waste and Biomass Valorization. ,vol. 10, pp. 617- 629 ,(2019) , 10.1007/S12649-017-0089-5
Sefiu Bello, Johnson Agunsoye, Jeleel Adebisi, Suleiman Hassan, Effect of aluminium particles on mechanical and morphological properties of epoxy nanocomposites Acta Periodica Technologica. pp. 25- 38 ,(2017) , 10.2298/APT1748025B
Sefiu A Bello, Johnson O Agunsoye, Jeleel A Adebisi, Funsho O Kolawole, Nasirudeen K Raji, Suleiman B Hassan, None, Quasi Crystal Al (1xxx)/Carbonised Coconut Shell Nanoparticles: Synthesis and Characterisation MRS Advances. ,vol. 3, pp. 2559- 2571 ,(2018) , 10.1557/ADV.2018.369
FO Kolawole, SK Kolawole, JO Agunsoye, SA Bello, JA Adebisi, WO Soboyejo, SB Hassan, None, Synthesis and Characterization of Cassava Bark Nanoparticles MRS Advances. ,vol. 3, pp. 2519- 2526 ,(2018) , 10.1557/ADV.2018.412
Sefiu Adekunle Bello, Johnson Olumuyiwa Agunsoye, Jeleel Adekunle Adebisi, Raphael Gboyega Adeyemo, Suleiman Bolaji Hassan, None, Optimization of tensile properties of epoxy aluminum particulate composites using regression models Journal of King Saud University - Science. ,vol. 32, pp. 402- 411 ,(2020) , 10.1016/J.JKSUS.2018.06.002
Sefiu Adekunle Bello, Johnson Olumuyiwa Agunsoye, Jeleel Adekunle Adebisi, Nasirudeen Kolawole Raji, Raphael Gboyega Adeyemo, Abdul Ganiyu Funsho Alabi, Suleiman Bolaji Hassan, Flexural Performances of Epoxy Aluminium Particulate Composites Engineering Journal. ,vol. 22, pp. 97- 107 ,(2018) , 10.4186/EJ.2018.22.4.97
S. A. Bellow, J. O. Agunsoye, J. A. Adebisi, F. O. Kolawole, S. B. Hassan, Physical Properties Of Coconut Shell Nanoparticles Kathmandu University Journal of Science, Engineering and Technology. ,vol. 12, pp. 63- 79 ,(2018) , 10.3126/KUSET.V12I1.21566
Vladimir Pokropivny, Rynno Lohmus, Irina Hussainova, Alex Pokropivny, Sergey Vlassov, Introduction to Nanomaterials and Nanotechnology CRC Press. pp. 1- 10 ,(2017) , 10.1201/9781315153285-1