Decision criteria for build orientation in layer-based machining
作者： Zhengyi Yang , Yonghua Chen
DOI: 10.1117/12.403670
关键词:
摘要: features). In order to overcome these limitations, a rapid manufacturing method called Robot based Layered Manufacturing(RoLM in brief) is developed. A robot with milling cutter mounted on the end-effector used build part layer bylayer. Given model, determination of orientation first step cycle and has large
hku.hk
sci-hub.se 参考文章(20)
Krishnan Ramaswami, PROCESS PLANNING FOR SHAPE DEPOSITION MANUFACTURING ,(1997)
Krzysztof Marciniak, Geometric Modelling for Numerically Controlled Machining ,(1992)
Lin-Lin Chen, T. C. Woo, Computational Geometry on the Sphere With Application to Automated Machining Journal of Mechanical Design. ,vol. 114, pp. 288- 295 ,(1992) , 10.1115/1.2916945
Prosenjit Gupta, Ravi Janardan, Jayanth Majhi, Tony Woo, Efficient geometric algorithms for workpiece orientation in 4- and 5-axis NC machining Computer-aided Design. ,vol. 28, pp. 577- 587 ,(1996) , 10.1016/0010-4485(95)00071-2
F. Xu, Y.S. Wong, H.T. Loh, J.Y.H. Fuh, T. Miyazawa, Optimal orientation with variable slicing in stereolithography Rapid Prototyping Journal. ,vol. 3, pp. 76- 88 ,(1997) , 10.1108/13552549710185644
Prashant Kulkarni, Anne Marsan, Debasish Dutta, A review of process planning techniques in layered manufacturing Rapid Prototyping Journal. ,vol. 6, pp. 18- 35 ,(2000) , 10.1108/13552540010309859
F. Xu, H.T. Loh, Y.S. Wong, Considerations and selection of optimal orientation for different rapid prototyping systems Rapid Prototyping Journal. ,vol. 5, pp. 54- 60 ,(1999) , 10.1108/13552549910267344
W Yang, H Ding, Y Xiong, Manufacturability Analysis for a Sculptured Surface Using Visibility Cone Computation The International Journal of Advanced Manufacturing Technology. ,vol. 15, pp. 317- 321 ,(1999) , 10.1007/S001700050073
Gershon Elber, Accessibility in 5-axis milling environment Computer-aided Design. ,vol. 26, pp. 796- 802 ,(1994) , 10.1016/0010-4485(94)90093-0
Johan W.H. Tangelder, Joris SM Vergeest, Mark H Overmars, Interference-free NC machining using spatial planning and Minkowski operations Computer-aided Design. ,vol. 30, pp. 277- 286 ,(1998) , 10.1016/S0010-4485(97)00072-9