Why the ball to powder ratio (BPR) is insufficient for describing the mechanical ball milling process
作者： P. Kuziora , M. Wyszyńska , M. Polanski , J. Bystrzycki
DOI: 10.1016/J.IJHYDENE.2014.03.009
关键词:
摘要: Abstract The ball to powder ratio (BPR) is a processing parameter that frequently used in both mechanical (ball) milling and alloying. A number of recent studies provided the BPR as principal while neglecting other parameters, such vial volume, diameter quantity balls mass. In this experiment, different batches magnesium hydride were milled using varying size, mass, parameters constant BPR. hydrogen desorption properties (i.e., differential scanning calorimeter) phase evolution XRD analysis) powders subsequently investigated. obtained results demonstrated cannot be single parameter. DSC curves during decomposition with rate 5 °C/min revealed significant differences peak temperature among samples same Additionally, patterns crystallite size after varied, suggesting existed effectiveness process.
sci-hub.se 参考文章(36)
Hamid Abdoli, Ehsan Saebnouri, Seyed Khatiboleslam Sadrnezhaad, Mohsen Ghanbari, Taghi Shahrabi, Processing and surface properties of Al–AlN composites produced from nanostructured milled powders Journal of Alloys and Compounds. ,vol. 490, pp. 624- 630 ,(2010) , 10.1016/J.JALLCOM.2009.10.121
M. Hedayati, M. Salehi, R. Bagheri, M. Panjepour, A. Maghzian, Ball milling preparation and characterization of poly (ether ether ketone)/surface modified silica nanocomposite Powder Technology. ,vol. 207, pp. 296- 303 ,(2011) , 10.1016/J.POWTEC.2010.11.011
Yong Han, Jinglian Fan, Tao Liu, Huichao Cheng, Jiamin Tian, The effect of trace nickel additive and ball milling treatment on the near-full densification behavior of ultrafine tungsten powder International Journal of Refractory Metals & Hard Materials. ,vol. 34, pp. 18- 26 ,(2012) , 10.1016/J.IJRMHM.2012.02.014
Sandra Kurko, Željka Rašković, Nikola Novaković, Bojana Paskaš Mamula, Zoran Jovanović, Zvezdana Baščarević, Jasmina Grbović Novaković, Ljiljana Matović, Hydrogen storage properties of MgH2 mechanically milled with α and β SiC International Journal of Hydrogen Energy. ,vol. 36, pp. 549- 554 ,(2011) , 10.1016/J.IJHYDENE.2010.07.022
Dorthe B. Ravnsbaek, Lise H. Sørensen, Yaroslav Filinchuk, Flemming Besenbacher, Torben R. Jensen, Screening of metal borohydrides by mechanochemistry and diffraction Angewandte Chemie. ,vol. 51, pp. 3582- 3586 ,(2012) , 10.1002/ANIE.201106661
P.-A. Huhn, M. Dornheim, T. Klassen, R. Bormann, Thermal stability of nanocrystalline magnesium for hydrogen storage Journal of Alloys and Compounds. ,vol. 404-406, pp. 499- 502 ,(2005) , 10.1016/J.JALLCOM.2004.10.087
Selim Coşkun, M. Lütfi Öveçoğlu, Burak Özkal, Metin Tanoğlu, Characterization investigations during mechanical alloying and sintering of W–20 vol% SiC composites Journal of Alloys and Compounds. ,vol. 492, pp. 576- 584 ,(2010) , 10.1016/J.JALLCOM.2009.11.185
A.R. Shirani Bidabadi, M.H. Enayati, E. Dastanpoor, R.A. Varin, M. Biglari, Nanocrystalline intermetallic compounds in the Ni–Al–Cr system synthesized by mechanical alloying and their thermodynamic analysis Journal of Alloys and Compounds. ,vol. 581, pp. 91- 100 ,(2013) , 10.1016/J.JALLCOM.2013.07.037
D. B. Ravnsbæk, E. A. Nickels, R. Černý, C. H. Olesen, W. I. F. David, P. P. Edwards, Y. Filinchuk, T. R. Jensen, Novel alkali earth borohydride Sr(BH4)2 and borohydride-chloride Sr(BH4)Cl Inorganic Chemistry. ,vol. 52, pp. 10877- 10885 ,(2013) , 10.1021/IC400862S
M. Samadi Khoshkhoo, S. Scudino, J. Thomas, K.B. Surreddi, J. Eckert, Grain and crystallite size evaluation of cryomilled pure copper Journal of Alloys and Compounds. ,vol. 509, ,(2011) , 10.1016/J.JALLCOM.2011.02.066