On Modulus and Fracture Toughness of Rigid Particulate Filled High Density Polyethylene
作者： R Walter , K Friedrich , V Privalko , A Savadori , None
DOI: 10.1080/00218469708010533
关键词:
摘要: A Kaolin-filled, high-density polyethylene (HDPE) system was used to illustrate the influence of particulates on modulus and toughness bulk material. variation filler content, particulate size coupling quality for two HDPE-matrix systems with different viscosity led a strong dependency elastic fracture under various testing conditions, e.g. static loading, fatigue impact. stiffness improvement increasing content achieved by all qualities. The developed Kaolin reinforcement HDPE optimised offers an investigated loading conditions. degree depends matrix viscosity. energy dissipation mechanisms were fractographic analysis.
sci-hub.se 参考文章(21)
Harry S. Katz, John V. Milewski, Handbook Of Fillers For Plastics ,(1987)
Robert F. Landel, Lawrence E. Nielsen, Mechanical Properties of Polymers and Composites ,(1993)
S. F. Xavier, J. M. Schultz, K. Friedrich, Fracture propagation in particulate filled polypropylene composites Journal of Materials Science. ,vol. 25, pp. 2411- 2420 ,(1990) , 10.1007/BF00638035
B. Turcsányi, B. Pukánszky, F. Tüdõs, Composition dependence of tensile yield stress in filled polymers Journal of Materials Science Letters. ,vol. 7, pp. 160- 162 ,(1988) , 10.1007/BF01730605
J. Jancar, A. T. Dibenedetto, The mechanical properties of ternary composites of polypropylene with inorganic fillers and elastomer inclusions Journal of Materials Science. ,vol. 29, pp. 4651- 4658 ,(1994) , 10.1007/BF00376292
B Pukánszky, K. Belina, A. Rockenbauer, F.H.J. Maurer, Effect of nucleation, filler anisotropy and orientation on the properties of PP composites Composites. ,vol. 25, pp. 205- 214 ,(1994) , 10.1016/0010-4361(94)90018-3
J.P. Trotignon, L. Demdoum, J. Verdu, Effect of mineral fillers in low concentration on the mechanical properties of polymeric materials. Part 1: Static and fatigue fracture of polypropylene, qualitative aspects Composites. ,vol. 23, pp. 313- 318 ,(1992) , 10.1016/0010-4361(92)90330-W
F. H. J. Maurer, R. Kosfeld, Th. Uhlenbroich, Interfacial interaction in kaolin-filled polyethylene composites Colloid and Polymer Science. ,vol. 263, pp. 624- 630 ,(1985) , 10.1007/BF01419886
K. Friedrich, U. A. Karsch, Failure processes in particulate filled polypropylene Journal of Materials Science. ,vol. 16, pp. 2167- 2175 ,(1981) , 10.1007/BF00542377
V. Doláková, F. Hudeĉek, Structure of filled linear polyethylene Journal of Macromolecular Science, Part B. ,vol. 15, pp. 337- 346 ,(1978) , 10.1080/00222347808212259