Apparatus, system, and method for maintaining data in a storage array
作者： David Alan Burton , Bruce A. Woller , Joseph Paul Hughes , Noel Simen Otterness
DOI:
关键词:
摘要: An apparatus, system, and process are disclosed for maintaining data in an electronic storage array during multiple, concurrent drive failures. A first failure is recognized the system controller subsequently enters a operating mode. The then recognizes second mode, which different from response to failure. mode allows recovery module access of failed controlled manner order attempt recover on drive. Also, pinned may allow write be written drive, instead while
lens.org 参考文章(25)
Ishai Kedem, Method and apparatus for dynamic sparing in a RAID storage system ,(1997)
Brent C. Beardsley, Bradley S. Powers, Susan K. Candelaria, Mark A. Reid, Storage controller having additional cache memory and a means for recovering from failure and reconfiguring a control unit thereof in response thereto ,(1992)
Dale Arthur Legband, Daniel Quinto Bandera, Hot spare light weight mirror for raid system ,(1998)
Takashi Kanazawa, Hiroyuki Suzuki, Method for recovering from drive failure in storage media library array apparatus ,(2001)
Joseph G. Skazinski, Noel S. Otterness, Brian D. McKean, System and method for efficient failover/failback techniques for fault-tolerant data storage system ,(2001)
Richard W. Busser, Recovering data from arrays of storage devices after certain failures ,(2001)
Kelly J. Reasoner, Rick A. Kato, David P. Jones, System for online SCSI drive repair utilizing detachable secondary I/O buses pigtailed to primary I/O bus wherein each secondary I/O bus has a length in excess of 100mm ,(1995)
Richard A. Ewert, Stephen M. Schultz, Automatic hard disk bad sector remapping ,(1990)
Joseph F. Krantz, Method for reorganizing the data on a RAID-4 or RAID-5 array in the absence of one disk ,(1993)