Tribological Behavior of PVD Hard Coated Cutting Tools under Cryogenic Cooling Conditions
作者： M. Yousfi , J.C. Outeiro , C. Nouveau , B. Marcon , B. Zouhair
DOI: 10.1016/J.PROCIR.2017.03.269
关键词:
摘要: Cryogenic assistance is used to improve machining performance and enhance tool life under extreme contact conditions (pressure temperature). This paper focuses on the influence of cryogenic cooling using liquid nitrogen within context Ti6Al4 V with CrN-coated carbide cutting tools. Friction behavior both uncoated pins without were evaluated a home-made laboratory tribometer. The adhesive plastic friction coefficients finite element model pin-Ti6Al4 system through an inverse methodology. Finally, contribution CrN coatings was dry conditions.
ensam.eu
archives-ouvertes.fr
sci-hub.se 参考文章(12)
K.A. Venugopal, S. Paul, A.B. Chattopadhyay, Tool wear in cryogenic turning of Ti-6Al-4V alloy Cryogenics. ,vol. 47, pp. 12- 18 ,(2007) , 10.1016/J.CRYOGENICS.2006.08.011
F. Zemzemi, J. Rech, W. Ben Salem, A. Dogui, P. Kapsa, Identification of a friction model at tool/chip/workpiece interfaces in dry machining of AISI4142 treated steels Journal of Materials Processing Technology. ,vol. 209, pp. 3978- 3990 ,(2009) , 10.1016/J.JMATPROTEC.2008.09.019
R. Kovacevic, C. Cherukuthota, M. Mazurkiewicz, High pressure waterjet cooling/lubrication to improve machining efficiency in milling International Journal of Machine Tools & Manufacture. ,vol. 35, pp. 1459- 1473 ,(1995) , 10.1016/0890-6955(95)00128-K
Shane Y Hong, Irel Markus, Woo-cheol Jeong, New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V International Journal of Machine Tools & Manufacture. ,vol. 41, pp. 2245- 2260 ,(2001) , 10.1016/S0890-6955(01)00041-4
Giovanna Rotella, Domenico Umbrello, Finite element modeling of microstructural changes in dry and cryogenic cutting of Ti6Al4V alloy CIRP Annals. ,vol. 63, pp. 69- 72 ,(2014) , 10.1016/J.CIRP.2014.03.074
C. Courbon, F. Pusavec, F. Dumont, J. Rech, J. Kopac, Influence of cryogenic lubrication on the tribological properties of Ti6Al4V and Inconel 718 alloys under extreme contact conditions Lubrication Science. ,vol. 26, pp. 315- 326 ,(2014) , 10.1002/LS.1254
C. Courbon, F. Pusavec, F. Dumont, J. Rech, J. Kopac, Tribological behaviour of Ti6Al4V and Inconel718 under dry and cryogenic conditions—Application to the context of machining with carbide tools Tribology International. ,vol. 66, pp. 72- 82 ,(2013) , 10.1016/J.TRIBOINT.2013.04.010
Anuj Kumar Sharma, Arun Kumar Tiwari, Amit Rai Dixit, Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review Journal of Cleaner Production. ,vol. 127, pp. 1- 18 ,(2016) , 10.1016/J.JCLEPRO.2016.03.146
I.S. Jawahir, H. Attia, D. Biermann, J. Duflou, F. Klocke, D. Meyer, S.T. Newman, F. Pusavec, M. Putz, J. Rech, V. Schulze, D. Umbrello, Cryogenic manufacturing processes Cirp Annals-manufacturing Technology. ,vol. 65, pp. 713- 736 ,(2016) , 10.1016/J.CIRP.2016.06.007
Khalil Aouadi, Corinne Nouveau, Aurélien Besnard, Brahim Tlili, Moez Chafra, Effect of substrate bias voltage on the microstructure and tribological properties of CrN coatings Annales De Chimie-science Des Materiaux. ,vol. 40, pp. 9- 15 ,(2016) , 10.3166/ACSM.40.9-15