Sponge-like NaFe2PO4(SO4)2@rGO as a high-performance cathode material for sodium-ion batteries

作者: Xing-Long Wu , Zhen-Yi Gu , Chen-De Zhao , Shao-Fang Li , Yun-Feng Meng

DOI: 10.1039/D1NJ00262G

关键词:

摘要: The traditional methods of preparing cathode materials usually require long time consuming and high temperature annealing, which consume a lot material financial resources. Herein, we report an ultrafast self-propagating combustion process to prepare sponge-like NaFe2PO4(SO4)2@reduced graphene oxide (NFPS@rGO) with favorable surface characteristics. This product is successfully prepared in short well coated reduced due its loose porous structure. Benefiting from the carbon coating, NFPS@rGO demonstrates enhanced rate cyclic performance than that pristine NFPS. discharge specific capacity still retains 43.4 mA h g−1 at current density 500 g−1. After 100 cycles 50 g−1, retention 83.3%, also higher NFPS by 34.7%. In addition, fabricated hard carbon‖NFPS@rGO full-cell exhibits performance. study provides meaningful guidance for modification sodium-ion batteries promotes practical possibility.

参考文章(35)
Prabeer Barpanda, Gosuke Oyama, Shin-ichi Nishimura, Sai-Cheong Chung, Atsuo Yamada, A 3.8-V earth-abundant sodium battery electrode. Nature Communications. ,vol. 5, pp. 4358- 4358 ,(2014) , 10.1038/NCOMMS5358
Jin-Zhi Guo, Xing-Long Wu, Fang Wan, Jie Wang, Xiao-Hua Zhang, Rong-Shun Wang, A Superior Na3V2(PO4)3-Based Nanocomposite Enhanced by Both N-Doped Coating Carbon and Graphene as the Cathode for Sodium-Ion Batteries Chemistry - A European Journal. ,vol. 21, pp. 17371- 17378 ,(2015) , 10.1002/CHEM.201502583
A. K. Padhi, K. S. Nanjundaswamy, J. B. Goodenough, Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries Journal of The Electrochemical Society. ,vol. 144, pp. 1188- 1194 ,(1997) , 10.1149/1.1837571
Ting Jin, Huangxu Li, Kunjie Zhu, Peng-Fei Wang, Pei Liu, Lifang Jiao, Polyanion-type cathode materials for sodium-ion batteries Chemical Society Reviews. ,vol. 49, pp. 2342- 2377 ,(2020) , 10.1039/C9CS00846B
Guo-Qiang Liu, Yue Li, Yu-Long Du, Lei Wen, Synthesis and properties of Na 0.8 Ni 0.4 Mn 0.6 O 2 oxide used as cathode material for sodium ion batteries Rare Metals. ,vol. 36, pp. 977- 980 ,(2017) , 10.1007/S12598-016-0757-9
Konda Shiva, Preetam Singh, Weidong Zhou, John B. Goodenough, NaFe2PO4(SO4)2: a potential cathode for a Na-ion battery Energy and Environmental Science. ,vol. 9, pp. 3103- 3106 ,(2016) , 10.1039/C6EE01093H
Shuangqiang Chen, Chao Wu, Laifa Shen, Changbao Zhu, Yuanye Huang, Kai Xi, Joachim Maier, Yan Yu, Challenges and Perspectives for NASICON-Type Electrode Materials for Advanced Sodium-Ion Batteries Advanced Materials. ,vol. 29, pp. 1700431- ,(2017) , 10.1002/ADMA.201700431
Bao-Hua Hou, Ying-Ying Wang, Jin-Zhi Guo, Yu Zhang, Qiu-Li Ning, Yang Yang, Wen-Hao Li, Jing-Ping Zhang, Xin-Long Wang, Xing-Long Wu, A Scalable Strategy To Develop Advanced Anode for Sodium-Ion Batteries: Commercial Fe3O4-Derived Fe3O4@FeS with Superior Full-Cell Performance ACS Applied Materials & Interfaces. ,vol. 10, pp. 3581- 3589 ,(2018) , 10.1021/ACSAMI.7B16580
Yang Yang, Dao-Sheng Liu, Xing-Long Wu, Bao-Hua Hou, Wei-Lin Pang, Ke-Cheng Huang, Jing-Ping Zhang, Zhong-Min Su, Jin-Zhi Guo, A Practicable Li/Na‐Ion Hybrid Full Battery Assembled by a High‐Voltage Cathode and Commercial Graphite Anode: Superior Energy Storage Performance and Working Mechanism Advanced Energy Materials. ,vol. 8, pp. 1702504- ,(2018) , 10.1002/AENM.201702504
Chao Shen, Hai Long, Gencheng Wang, Wei Lu, Le Shao, Keyu Xie, Na3V2(PO4)2F3@C dispersed within carbon nanotube frameworks as a high tap density cathode for high-performance sodium-ion batteries Journal of Materials Chemistry. ,vol. 6, pp. 6007- 6014 ,(2018) , 10.1039/C8TA00990B