Evaluation of the effect of Bi, Sb, Sr and cooling condition on eutectic phases in an Al–Si–Cu alloy (ADC12) by in situ thermal analysis
作者： S. Farahany , A. Ourdjini , M.H. Idrsi , S.G. Shabestari
DOI: 10.1016/J.TCA.2013.02.024
关键词:
摘要: Abstract Al–Si and Al–Cu eutectic phases strongly affect the properties of Al–Si–Cu cast alloys. The characteristic parameters these two with addition bismuth, antimony strontium under different cooling rates (0.6–2 °C/s) were investigated in ADC12 alloy using situ thermal analysis. Results show that additives phase more than (Al2Cu) phase. Addition elements showed scenarios response to rate terms recalescence Both Bi Sb caused an increase increased but Sr reduced recalescence. Additions nucleation temperature Al2Cu, produced opposite effect. There seems be relationship between solidification range fraction solid Al2Cu phases. As increases decreased increased.
sci-hub.se 参考文章(22)
Roy Elliott, Eutectic Solidification Processing: Crystalline and Glassy Alloys ,(1983)
Wattanachai Prukkanon, Nakorn Srisukhumbowornchai, Chaowalit Limmaneevichitr, Modification of hypoeutectic Al–Si alloys with scandium Journal of Alloys and Compounds. ,vol. 477, pp. 454- 460 ,(2009) , 10.1016/J.JALLCOM.2008.10.016
Keke Chang, Shuhong Liu, Dongdong Zhao, Yong Du, Liangcai Zhou, Li Chen, Thermodynamic description of the Al–Cu–Mg–Mn–Si quinary system and its application to solidification simulation Thermochimica Acta. ,vol. 512, pp. 258- 267 ,(2011) , 10.1016/J.TCA.2010.11.009
S. Mohsen Sadrossadat, Sten Johansson, Ru Lin Peng, EBSD investigation of the effect of the solidification rate on the nucleation behavior of eutectic components in a hypoeutectic Al-Si-Cu alloy Metals and Materials International. ,vol. 18, pp. 405- 411 ,(2012) , 10.1007/S12540-012-3004-4
A.A. Canales, J. Talamantes-Silva, D. Gloria, S. Valtierra, R. Colás, Thermal analysis during solidification of cast Al–Si alloys Thermochimica Acta. ,vol. 510, pp. 82- 87 ,(2010) , 10.1016/J.TCA.2010.06.026
M. Okayasu, Y. Ohkura, S. Takeuchi, S. Takasu, H. Ohfuji, T. Shiraishi, A study of the mechanical properties of an Al–Si–Cu alloy (ADC12) produced by various casting processes Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 543, pp. 185- 192 ,(2012) , 10.1016/J.MSEA.2012.02.073
A.K. Prasada Rao, K. Das, B.S. Murty, M. Chakraborty, On the modification and segregation behavior of Sb in Al–7Si alloy during solidification Materials Letters. ,vol. 62, pp. 2013- 2016 ,(2008) , 10.1016/J.MATLET.2007.11.005
JaeHwang Kim, Calin Daniel Marioara, Randi Holmestad, Equo Kobayashi, Tatsuo Sato, Effects of Cu and Ag additions on age-hardening behavior during multi-step aging in AlMgSi alloys Materials Science and Engineering: A. ,vol. 560, pp. 154- 162 ,(2013) , 10.1016/J.MSEA.2012.09.051
T. Hosch, L. G. England, R. E. Napolitano, Analysis of the high growth-rate transition in Al–Si eutectic solidification Journal of Materials Science. ,vol. 44, pp. 4892- 4899 ,(2009) , 10.1007/S10853-009-3747-6
A. Knuutinen, K. Nogita, S.D. McDonald, A.K. Dahle, Modification of Al–Si alloys with Ba, Ca, Y and Yb Journal of Light Metals. ,vol. 1, pp. 229- 240 ,(2001) , 10.1016/S1471-5317(02)00004-4