Reaction synthesis and wear resistance of a TiCp/Ni3Al-Fe composite coating on steel
作者： Minxian Wei , Shuqi Wang , Xianghong Cui , Zirun Yang , Yutao Zhao
DOI: 10.3139/146.110475
关键词:
摘要: Abstract A multiphasic composite coating on steel was fabricated by reaction synthesis in the melt. The ceramic particulate reinforced intermetallic matrix (TiCp/Ni3Al) and mixture (TiCp/Ni3Al-Fe) of were successively formed from surface to matrix. Metallurgical fusion reactive products with melt occurred form after solidification. Ti-C-3Ni-Al system employed synthesize coating. processes investigated using a differential scanning calorimeter an X-ray diffractometer. presented higher elevated-temperature wear resistance than H13 markedly postponed transition mild severe wear.
hanser-elibrary.com参考文章(20)
Mo Xiang-yin, Xu Zhong-zi, Wu Ke-ru, Tang Ming-shu, Alkali-silica reaction inhibited by LiOH and its mechanism Journal of Wuhan University of Technology-Mater. Sci. Ed.. ,vol. 18, pp. 13- 16 ,(2003) , 10.1007/BF02835077
Hélio Goldenstein, Yuri Nunes Silva, Humberto N Yoshimura, None, Designing a new family of high temperature wear resistant alloys based on Ni3Al IC: experimental results and thermodynamic modelling Intermetallics. ,vol. 12, pp. 963- 968 ,(2004) , 10.1016/J.INTERMET.2004.02.027
S. Shibuya, Y. Kaneno, M. Yoshida, T. Takasugi, Dual multi-phase intermetallic alloys composed of geometrically close packed Ni3X (X: Al, Ti and V) type structures – II. Mechanical properties Acta Materialia. ,vol. 54, pp. 861- 870 ,(2006) , 10.1016/J.ACTAMAT.2005.10.016
C.L. Yeh, S.H. Su, H.Y. Chang, Effects of TiC addition on combustion synthesis of NiAl in SHS mode Journal of Alloys and Compounds. ,vol. 398, pp. 85- 93 ,(2005) , 10.1016/J.JALLCOM.2005.02.028
H.M. Wang, G. Duan, Wear and corrosion behavior of laser clad Cr3Si reinforced intermetallic composite coatings Intermetallics. ,vol. 11, pp. 755- 762 ,(2003) , 10.1016/S0966-9795(03)00078-5
Yisan Wang, Xinyuan Zhang, Fengchun Li, Guangting Zeng, Study on an Fe–TiC surface composite produced in situ Materials & Design. ,vol. 20, pp. 233- 236 ,(1999) , 10.1016/S0261-3069(98)00049-1
X.H. Cui, S.Q. Wang, F. Wang, K.M. Chen, Research on oxidation wear mechanism of the cast steels Wear. ,vol. 265, pp. 468- 476 ,(2008) , 10.1016/J.WEAR.2007.11.015
Masahiro Inoue, Katsuaki Suganuma, Koichi Niihara, Fracture mechanism of Ni3Al alloys and their composites with ceramic particles at elevated temperatures Intermetallics. ,vol. 8, pp. 365- 370 ,(2000) , 10.1016/S0966-9795(99)00095-3
C. Sierra, A.J. Vázquez, NiAl coatings on carbon steel by self-propagating high-temperature synthesis assisted with concentrated solar energy: mass influence on adherence and porosity Solar Energy Materials and Solar Cells. ,vol. 86, pp. 33- 42 ,(2005) , 10.1016/J.SOLMAT.2004.06.003
R.S Mishra, Z.Y Ma, I Charit, Friction stir processing: a novel technique for fabrication of surface composite Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 341, pp. 307- 310 ,(2003) , 10.1016/S0921-5093(02)00199-5