Design of fully covering ferritic inside wall to reduce toroidal ripple in JFT-2M
作者： M. Sato , H. Kimura , K. Tsuzuki , M. Hasegawa , F. Satoa
DOI: 10.1109/FUSION.2003.1426679
关键词:
摘要: A ripple reduction is made by fully covering ferritic inside wall (FIW) as simulation of the blanket wall. We pay attention on avoidance generation higher harmonic ripple. The n-th mode becomes almost zero in case that toroidal width steel corresponds to 2/spl pi//(n times number field coils). Effective method reduce with FIW developed. confirmed magnetic measurement and losses was successfully demonstrated.
sci-hub.se 参考文章(20)
K Kamiya, H Kimura, H Ogawa, H Kawashima, K Tsuzuki, M Sato, Y Miura, JFT-2M Group, Observation of High Recycling Steady H-mode edge and compatibility with improved core confinement mode on JFT-2M Nuclear Fusion. ,vol. 43, pp. 1214- 1219 ,(2003) , 10.1088/0029-5515/43/10/024
K Tsuzuki, H Kimura, H Kawashima, M Sato, K Kamiya, K Shinohara, H Ogawa, K Hoshino, M Bakhtiari, S Kasai, K Uehara, H Sasao, Y Kusama, N Isei, Y Miura, T Ogawa, M Yamamoto, T Shibata, K Kikuchi, K Miyachi, T Ito, H Ajikawa, S Nomura, H Tsutsui, R Shimada, T Ido, Y Hamada, N Fukumoto, M Nagata, T Uyama, H Niimi, S Yatsu, N Kayukawa, T Hino, Y Hirohata, Y Nagashima, A Ejiri, A Amemiya, Y Sadamoto, A Tsushima, High performance tokamak experiments with a ferritic steel wall on JFT-2M Nuclear Fusion. ,vol. 43, pp. 1288- 1293 ,(2003) , 10.1088/0029-5515/43/10/033
T Nakayama, M Abe, T Tadokoro, M Otsuka, Evaluation of magnetic fields due to the ferromagnetic vacuum vessel and their influence on plasma discharge in tokamak devices Journal of Nuclear Materials. ,vol. 271, pp. 491- 495 ,(1999) , 10.1016/S0022-3115(98)00806-X
K Ioki, V Barabash, A Cardella, F Elio, Y Gohar, G Janeschitz, G Johnson, G Kalinin, D Lousteau, M Onozuka, R Parker, G Sannazzaro, R Tivey, Design and Material Selection for ITER First Wall/Blanket, Divertor and Vacuum Vessel Journal of Nuclear Materials. ,vol. 258, pp. 74- 84 ,(1998) , 10.1016/S0022-3115(98)00356-0
N. Isei, M. Sato, K. Tsuzuki, H. Kawashima, Y. Miura, H. Kimura, , Application of Low Activation Ferritic Steel in the JFT-2M Tokamak –Evaluation of Magnetic Effect on the Plasma– Fusion Technology. ,vol. 39, pp. 1101- 1105 ,(2001) , 10.13182/FST01-A11963391
S. Suzuki, K. Tsuzuki, H. Kimura, H. Kawashima, M. Sato, M. Yamamoto, T. Shibata, F. Okano, Y. Kashiwa, Y. Kusama, K. Urata, M. Hasegawa, F. Sato, Y. Suzuki, Engineering design in installation of fully covering ferritic inside wall on JFT-2M 20th IEEE/NPSS Symposium onFusion Engineering, 2003.. pp. 189- 192 ,(2003) , 10.1109/FUSION.2003.1426620
K Tsuzuki, M Sato, H Kawashima, Y Miura, H Kimura, T Abe, K Uehara, T Ogawa, T Akiyama, T Shibata, M Yamamoto, T Koike, Ripple reduction and surface coating tests with ferritic steel on JFT-2M Journal of Nuclear Materials. ,vol. 283, pp. 681- 684 ,(2000) , 10.1016/S0022-3115(00)00278-6
H Kawashima, M Sato, K Tsuzuki, Y Miura, N Isei, H Kimura, T Nakayama, M Abe, D.S Darrow, JFT-2M Group, Demonstration of ripple reduction by ferritic steel board insertion in JFT-2M Nuclear Fusion. ,vol. 41, pp. 257- 263 ,(2001) , 10.1088/0029-5515/41/3/302
Takeshi Nakayama, Mitsushi Abe, Kazuhiro Takeuchi, Yukitoshi Miura, Masayasu Sato, Development of a Decision Method for Optimum Ferromagnetic Board Arrangements to Reduce Toroidal Magnetic Field Ripple Japanese Journal of Applied Physics. ,vol. 40, pp. 3409- 3413 ,(2001) , 10.1143/JJAP.40.3409
Masayasu Sato, Yukitoshi Miura, Satoru Takeji, Haruyuki Kimura, Kiyoyuki Shiba, Analysis of error field due to ferritic steel in the advanced material testing program of JFT-2M Journal of Nuclear Materials. ,vol. 258, pp. 1253- 1258 ,(1998) , 10.1016/S0022-3115(98)00173-1