Ceramic coating on Ti-6Al-4V by plasma electrolytic oxidation in molten salt: Development and characterization

作者: Konstantin Borodianskiy , Michael Zinigrad , Alexander Sobolev

DOI: 10.1016/J.SURFCOAT.2021.126847

关键词:

摘要: Abstract The plasma electrolytic oxidation (PEO) method is one of the most promising methods for formation oxide coatings on metallic substrates. This process usually conducted in an aqueous solution electrolyte; however, it has several disadvantages, such as heating-up system and undesired chemical components. study addresses these disadvantages by conducting a molten salt electrolyte. surface morphology, phase composition, hydrophobicity, effects current frequency were examined. Thin titanium oxide, rutile anatase, coating 2–2.5 μm was formed treated Ti-6Al-4V alloys. potentiodynamic polarization test evaluated highest resistance alloy obtained using 150 Hz which 364×104 Ω·cm2 comparison with pristine 6.93×104 Ω·cm2. Electrochemical impedance spectroscopy revealed same behavior. Morphology evaluation that structure this contained uniform sub-micron porosity its exhibited hydrophobicity.

参考文章(42)
Salih Durdu, Metin Usta, Ali Sabri Berkem, Bioactive coatings on Ti6Al4V alloy formed by plasma electrolytic oxidation Surface & Coatings Technology. ,vol. 301, pp. 85- 93 ,(2016) , 10.1016/J.SURFCOAT.2015.07.053
U. Balachandran, N.G. Eror, Raman spectra of titanium dioxide Journal of Solid State Chemistry. ,vol. 42, pp. 276- 282 ,(1982) , 10.1016/0022-4596(82)90006-8
XL Zhang, Zh H Jiang, Zh P Yao, Zh D Wu, None, Electrochemical study of growth behaviour of plasma electrolytic oxidation coating on Ti6Al4V: Effects of the additive Corrosion Science. ,vol. 52, pp. 3465- 3473 ,(2010) , 10.1016/J.CORSCI.2010.06.017
Xuelin Zhang, Zhongpin Yao, Zhaohua Jiang, Yufeng Zhang, Xiaowei Liu, None, Investigation of the plasma electrolytic oxidation of Ti6Al4V under single-pulse power supply Corrosion Science. ,vol. 53, pp. 2253- 2262 ,(2011) , 10.1016/J.CORSCI.2011.03.005
A.L. Yerokhin, X. Nie, A. Leyland, A. Matthews, S.J. Dowey, Plasma electrolysis for surface engineering Surface and Coatings Technology. ,vol. 122, pp. 73- 93 ,(1999) , 10.1016/S0257-8972(99)00441-7
A. Nominé, J. Martin, G. Henrion, T. Belmonte, Effect of cathodic micro-discharges on oxide growth during plasma electrolytic oxidation (PEO) Surface & Coatings Technology. ,vol. 269, pp. 131- 137 ,(2015) , 10.1016/J.SURFCOAT.2015.01.076
S. Stojadinović, R. Vasilić, M. Petković, B. Kasalica, I. Belča, A. Žekić, Lj. Zeković, Characterization of the plasma electrolytic oxidation of titanium in sodium metasilicate Applied Surface Science. ,vol. 265, pp. 226- 233 ,(2013) , 10.1016/J.APSUSC.2012.10.183
A.L. Yerokhin, X. Nie, A. Leyland, A. Matthews, Characterisation of oxide films produced by plasma electrolytic oxidation of a Ti–6Al–4V alloy Surface & Coatings Technology. ,vol. 130, pp. 195- 206 ,(2000) , 10.1016/S0257-8972(00)00719-2