Shear bond strengths of veneering porcelain to cast, machined and laser-sintered titanium.
作者： Ufuk ISERI , Zeynep ÖZKURT , Ender KAZAZOGLU
DOI: 10.4012/DMJ.2010-101
关键词:
摘要: … porcelain to be 28.3 MPa13). In the present study, Triceram veneer porcelain showed the same results to both cast (… MPa); but for Titankeramik porcelain, the bond strength to machined …
sci-hub.se 参考文章(24)
Zhuo Cai, Ty Shafer, Ikuya Watanabe, Martha E Nunn, Toru Okabe, Electrochemical characterization of cast titanium alloys. Biomaterials. ,vol. 24, pp. 213- 218 ,(2003) , 10.1016/S0142-9612(02)00293-4
Jarosław Bieniaś, Barbara Surowska, Anna Stoch, Halina Matraszek, Mariusz Walczak, The influence of SiO2 and SiO2-TiO2 intermediate coatings on bond strength of titanium and Ti6Al4V alloy to dental porcelain. Dental Materials. ,vol. 25, pp. 1128- 1135 ,(2009) , 10.1016/J.DENTAL.2009.01.107
Koichi Akagi, Yoshizo Okamoto, Tomoji Matsuura, Takashi Horibe, Properties of test metal ceramic titanium alloys. Journal of Prosthetic Dentistry. ,vol. 68, pp. 462- 467 ,(1992) , 10.1016/0022-3913(92)90411-3
Iok-Chao Pang, Jeremy L. Gilbert, John Chai, Eugene P. Lautenschlager, Bonding characteristics of low-fusing porcelain bonded to pure titanium and palladium-copper alloy The Journal of Prosthetic Dentistry. ,vol. 73, pp. 17- 25 ,(1995) , 10.1016/S0022-3913(05)80267-7
Jeremy L. Gilbert, David A. Covey, Eugene P. Lautenschlager, Bond characteristics of porcelain fused to milled titanium. Dental Materials. ,vol. 10, pp. 134- 140 ,(1994) , 10.1016/0109-5641(94)90054-X
Manoel G Troia Jr, Guilherme EP Henriques, Marcelo F Mesquita, Wagner S Fragoso, None, The effect of surface modifications on titanium to enable titanium–porcelain bonding Dental Materials. ,vol. 24, pp. 28- 33 ,(2008) , 10.1016/J.DENTAL.2007.01.009
Abdulaziz Sadeq, Zhuo Cai, Ronald D Woody, Amp W Miller, Effects of interfacial variables on ceramic adherence to cast and machined commercially pure titanium The Journal of Prosthetic Dentistry. ,vol. 90, pp. 10- 17 ,(2003) , 10.1016/S0022-3913(03)00263-4
J. Fischer, Ceramic bonding to a dental gold-titanium alloy. Biomaterials. ,vol. 23, pp. 1303- 1311 ,(2002) , 10.1016/S0142-9612(01)00248-4
Matts Andersson, Bo Bergman, Christer Bessing, Gunnel Ericson, Peter Lundquist, Hans Nilson, Clinical results with titanium crowns fabricated with machine duplication and spark erosion Acta Odontologica Scandinavica. ,vol. 47, pp. 279- 286 ,(1989) , 10.3109/00016358909007713
Saadet Atsü, Semih Berksun, Bond strength of three porcelains to two forms of titanium using two firing atmospheres Journal of Prosthetic Dentistry. ,vol. 84, pp. 567- 574 ,(2000) , 10.1067/MPR.2000.110267