Investigation of interfacial shear strength in a SiC fibre/Ti-24Al-11Nb composite by a fibre push-out technique

作者: J. I. Eldridge , P. K. Brindley

DOI: 10.1007/BF00720221

关键词:

摘要: A fiber push-out technique applied at several sample thicknesses was used to determine both the debond shear stress and frictional fiber-matrix interface room temperautre for a unidirectional SiC fiber-reinforced T-24Al-11Nb (in at. pct) composite prepared by powder cloth technique. The measures separate contributions of bond strength friction mechanical interface. It found that this material is significantly higher than (119.2 47.8 MPa, respectively).

参考文章(8)
Rustum Roy, H. J. Leamy, C. W. White, E. N. Kaufmann, R. L. Schwoebel, K. C. Taylor, C. J. Northrup, Materials Research Society Physics Today. ,vol. 37, pp. 87- 89 ,(1984) , 10.1063/1.2916117
D. H. Grande, J. F. Mandell, K. C. C. Hong, Fibre-matrix bond strength studies of glass, ceramic, and metal matrix composites Journal of Materials Science. ,vol. 23, pp. 311- 328 ,(1988) , 10.1007/BF01174071
Peter Bartoš, Analysis of pull-out tests on fibres embedded in brittle matrices Journal of Materials Science. ,vol. 15, pp. 3122- 3128 ,(1980) , 10.1007/BF00550385
M.R. Piggott, Debonding and friction at fibre-polymer interfaces. I: Criteria for failure and sliding Composites Science and Technology. ,vol. 30, pp. 295- 306 ,(1987) , 10.1016/0266-3538(87)90017-0
DAVID B. MARSHALL, Mechanisms of Failure from Surface Flaws in Mixed‐Mode Loading Journal of the American Ceramic Society. ,vol. 67, pp. 110- 116 ,(1984) , 10.1111/J.1151-2916.1984.TB09626.X