Mechanical properties and tribological performance of epoxy/Al2O3 nanocomposite
作者： D. Bazrgari , F. Moztarzadeh , A.A. Sabbagh-Alvani , M. Rasoulianboroujeni , M. Tahriri
DOI: 10.1016/J.CERAMINT.2017.10.068
关键词:
摘要: Abstract In this research, a systematic study has been directed to evaluate epoxy matrix nanocomposite performance of Al 2 O 3 nanoparticles incorporated into resin. An ultrasonic mixing process was utilized achieve homogenous dispersion these Several mechanical and tribological tests, such as three-point bending test, Izod impact test pin on ring wear were performed examine properties epoxy-Al nanocomposites. Nanocomposites displayed increased strength due the incorporation nanoparticles. addition, introduction resin at low values resulted in significant reduction rate coefficient friction. Such effects could be attributed loading. The influences nanoparticle are further described terms reinforcing methods.
sci-hub.se 参考文章(31)
Edward M. Petrie, Epoxy Adhesive Formulations ,(2005)
Robert F. Landel, Lawrence E. Nielsen, Mechanical Properties of Polymers and Composites ,(1993)
V. Girish Chandran, Sachin D. Waigaonkar, Mechanical properties and creep behavior of rotationally moldable linear low density polyethylene-fumed silica nanocomposites Polymer Composites. ,vol. 38, pp. 421- 430 ,(2017) , 10.1002/PC.23600
Mahdi Alajmi, Abdullah Shalwan, Correlation between Mechanical Properties with Specific Wear Rate and the Coefficient of Friction of Graphite/Epoxy Composites. Materials. ,vol. 8, pp. 4162- 4175 ,(2015) , 10.3390/MA8074162
R. Touri, F. Moztarzadeh, Z. Sadeghian, D. Bizari, M. Tahriri, M. Mozafari, The Use of Carbon Nanotubes to Reinforce 45S5 Bioglass-Based Scaffolds for Tissue Engineering Applications BioMed Research International. ,vol. 2013, pp. 465086- 465086 ,(2013) , 10.1155/2013/465086
Mohammad E. Khosroshahi, Lida Ghazanfari, Mohammad Tahriri, Characterisation of binary (Fe3O4/SiO2) biocompatible nanocomposites as magnetic fluid Journal of Experimental Nanoscience. ,vol. 6, pp. 580- 595 ,(2011) , 10.1080/17458080.2010.489582
C.B. Ng, L.S. Schadler, R.W. Siegel, Synthesis and mechanical properties of TiO2-epoxy nanocomposites Nanostructured Materials. ,vol. 12, pp. 507- 510 ,(1999) , 10.1016/S0965-9773(99)00170-1
Q. L. Ji, M. Q. Zhang, M. Z. Rong, B. Wetzel, K. Friedrich, Friction and Wear of Epoxy Composites Containing Surface Modified SiC Nanoparticles Tribology Letters. ,vol. 20, pp. 115- 123 ,(2005) , 10.1007/S11249-005-8301-3
J. E. Mark, J. Wen, Inorganic-organic composites containing mixed-oxide phases Macromolecular Symposia. ,vol. 93, pp. 89- 96 ,(1995) , 10.1002/MASY.19950930113
Tabassom Hooshmand, Alireza Abrishamchian, Farhood Najafi, Mohammadreza Mohammadi, Hossein Najafi, Mohammadreza Tahriri, Development of sol-gel-derived multi-wall carbon nanotube/hydroxyapatite nanocomposite powders for bone substitution: Journal of Composite Materials. ,vol. 48, pp. 483- 489 ,(2014) , 10.1177/0021998313475368